Japan, Shimizu
Shimizu Two-by-four Ruler – Carpenter Tools
Made in Japan
Manufacturer: Shimizu Manufacturing Co., Ltd
Features
The size of the ruler matches the width and thickness of the 2×4 lumber, making it ideal for 2×4 lumber. It can also be used for 1×4 material. The main body is a two-by-four ruler, and the two-by-four angle ruler is made of polycarbonate (resin), making it light and durable. The stainless steel 2×4 ruler is made of stainless steel and is durable.
Two-by-four ruler
Usage
- Right-angled line drawing before saw cutting can be done in one shot.
- Optimal positioning of nails or screws at joints can be done in one shot.
- It is possible to draw 1/2, 1/3, and 1/4 of the butt end of the material.
- It is possible to draw a line at 45 degrees before saw cutting.
- The center line of each surface of 2×4 material and 1×4 material can be drawn.
- Positioning lines can be drawn for framing and shelving of 2×4 and 1×4 materials.
- It is possible to draw lines for joints of halves, thirds, and quarters.
part number | Product name | JAN code |
12022 | Two-by-four ruler | 309084 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
Two-by-four angle ruler
Usage
- It is possible to draw a line from 0 to 90 degrees before cutting with a saw.
- Right-angled line drawing before saw cutting can be done in one shot.
- Optimal positioning of nails or screws at joints can be done in one shot.
- Positioning lines can be drawn for framing and shelving of 2×4 and 1×4 materials.
part number | Product name | JAN code |
12076 | Two-by-four angle ruler | 309121 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
Stainless steel 2×4 ruler
Usage
- Right-angled line drawing before saw cutting can be done in one shot.
- Optimal positioning of nails or screws at joints can be done in one shot.
- Optimal positioning of holes for dowel joints of 2×4 and 1×4 materials can be done in one shot.
- Can be used as a grooving guide when starting to cut 2×4 and 1×4 saws.
- In the case of framing and shelving of 2×4 and 1×4 materials, drawing lines for material positioning,
- It can be used as a right angle guide when fixing.
- The center line of each surface of 2×4 material and 1×4 material can be drawn.
- You can easily check the right angle by applying a ruler.
part number | Product name | JAN code |
12077 | Stainless steel 2×4 ruler | 309138 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
Related Products
-
Laser Optics Experimental Device
-
Niigata Seiki HS-300KD Stainless Steel Ruler Kaidan Narrow Type
-
Kimoto Blowing thickness measurement measure 20cm Slope and furnace spraying construction materials
-
Vital VH5 Manual Chain Block
-
Isolite Insulating Fibermax Module
-
Seiwa E05TH Conductive Cloth Tape EMC Products