,

SHOWA SOKKI 1607 Charge Vibration Meter

Made in Japan
Manufacturer: SHOWA SOKKI
Model: 1607

Features

  • Firstly, it is a user-friendly broadband vibration meter adept at handling sensors with built-in amplifiers and capable of performing a diverse array of measurements.
    Secondly, it serves as a versatile, compact vibration meter offering three modes of measurement: acceleration, velocity, and displacement.
    Moreover, it boasts a broad measurement range, capturing everything from the most subtle to the most significant vibrations. Owing to its compact size and compatibility with dry batteries, it showcases exceptional portability for on-site measurements.
    Additionally, its built-in high-pass and low-pass filters enable users to select the optimal band for their specific measurement needs.
    Furthermore, equipped with both AC and DC output terminals, it facilitates waveform analysis and level recording.
    Remarkably, the sensitivity of the sensor is easily adjustable, ensuring compatibility with a wide variety of sensors.
    Lastly, it is compatible not only with standard charge output type detectors but also with remote charge converters and detectors with built-in preamplifiers.

Specification

Charge signal input (Front BNC connector)
Input terminal for direct connection of charge output type detector
Adaptive detector sensitivity PU SENS × 1: 1.00 to 9.99 pC/G.
PU SENS × 10: 10.0 to 99.9 pC/G.
Detectors outside the above range can be used by reading the range.
Maximum input charge 10,000pC.
Constant current drive voltage input (back BNC connector)
built-in constant current power supply enables use of detector with built-in preamplifier
Adaptive detector sensitivity PU SENS×1: 1.00 to 9.99mV/G.
PU SENS×10: 10.0 to 99.9mV/G.
Maximum input voltage ±10V (actually limited by the measurement range of the detector).
Constant current setting range 0.4 to 4mA (by internal potentiometer, voltage is 15VDC).
Adaptive input sensitivity PU SENS×1: 1.00 to 9.99mV/G.
PU SENS×10: 10.0 to 99.9mV/G.
Maximum input voltage ±10V (Drive power ±15VDC).
output
Indicator Double scale from 0 to 1, 0 to 3 with minimum scale of 1/50 and BATT mark.
class 1.5 (average value detection equivalent peak display).
display selection of “PEAK”, “PP”, and “BATT” by switch.
Overload ramp When the internal circuit exceeds the linear range, the LED lights and automatically returns.
AC OUT (BNC) Waveform output.
±1V/full scale Output resistance 100Ω Maximum current 5mA.
DC OUT (BNC) Level output (average detection equivalent peak output).
0 to 1VDC Output resistance 100Ω Maximum current 5mA.
Measurement range (however, the range does not exceed the maximum input charge)
Acceleration 1 (G) 1Hz – 50kHz (1dB), 2Hz – 20kHz (0.5dB).
PU SENS x 10: 0.0316/0.1 – 100/316 full scale.
PU SENS x 1: 0.316/1 – 1000/3160 full scale.
Acceleration 2 (m/s2) 1Hz – 50kHz (1dB), 2Hz – 20kHz (0.5dB).
PU SENS x 10: 0.316/1 – 1000/3160 full scale.
PU SENS x 1: 3.16/10 – 10000/31600 full scale.
Velocity (cm/s) 3Hz – (0.5dB).
PU SENS x 10: 0.316/1 – 1000/3160 full scale.
PU SENS x 1: 3.16/10 – 10000/31600 full scale.
Displacement 1 (mm) 3Hz – (0.5dB).
PU SENS x 10: 0.1/0.316 – 316/1000 full scale.
PU SENS x 1: 1/3.16 – 3160/10000 full scale.
Displacement 2 (mm) 10Hz – (0.5dB).
PU SENS x 10: 0.01/0.0316 – 31.6/100 full scale.
PU SENS x 1: 0.1/0.316 – 316/1000 full scale.
filter
High pass filter (Hz) OUT(1Hz)/3/10/30/100.
Low pass filter (Hz) 300/1k/3k/10k/OUT(50KHz).
General specifications
Accuracy Within 3% for 80Hz, 100pC input.
calibration signal Level variable 80Hz sine wave (±2%) for output calibration.
power supply Dry battery: 4 AA dry batteries (DC6V).
alkaline type for 5 hours or more (2.5 hours for manganese).
AC100V: Depends on AC adapter (sold separately).
terms of use Temperature: 0 to 50°C Humidity: 90% RH or less.
Dimensions/mass 90(W)×177(H)×230(D)mm approx.2kg.

 

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top