,

SHOWA SOKKI 4035-50 Charge Amplifier for Vibration Measurement [General-purpose charge amplifier]

Made in Japan
Manufacturer: SHOWA SOKKI
Model: 4035-50

Features

The charge amplifier MODEL-4035-50 is a high-precision charge amplifier that converts the charge signal output from the detector into a voltage signal. Various analyzes are possible by connecting. Please try the low-cost, high-precision charge amplifier as a charge amplifier for measurement and vibration monitoring of lines, etc.”

  • High precision and low price are realized.
  • A dynamic range of 100 dB or more, and can handle a wide range of acceleration from minute to large acceleration.
  • A charge amplifier that is resistant to minute vibrations due to its low-noise design.
  • Unnecessary noise components can be cut with high-pass and low-pass filters.
  • Compatible with charge output type and preamp built-in type acceleration sensors.
  • Measurement is possible from 1CH by using an AC adapter.
  • A small, lightweight, high-performance charge amplifier with a built-in 7-stage range.
  • Compatible with sensors with built-in amplifiers.

1CH/3CH configuration example

Specification

input terminalIsolated BNC connector
adaptive detectorCharge output detector (pC type), preamp built-in detector (mV type)
Constant current drive power supply+24V, 3mA constant current (when using detector with built-in preamplifier)
Frequency characteristic0.5Hz to 100kHz・・・+1, -3dB
1Hz to 50kHz・・・±1dB
5Hz to 20kHz・・・±0.5dB
full scale sensitivityStandard type (4035-50): 1 V/1 pC (mV) to 10,000 pC (mV)
High sensitivity type (4035-51): 1 V/0.1 pC (mV) to 1,000 pC (mV)
Large input type (4035-52) : 1V/10pC (mV) ~ 100,000pC (mV)
Maximum input type (4035-53): 1V/100pC (mV) ~ 1,000,000pC (mV)
Measurement range
(sensor sensitivity: range)
1.00 to 9.99 pC (mV)/UNIT for standard type
: 1, 3, 10, 30, 100, 300, 1,000 UNIT/V
10.0 to 99.9 pC (mV)/UNIT: 0.1, 0.3, 1, 3, 10, 30, 100 UNIT/V
100 to 999 pC (mV)/UNIT: 0.01, 0.03, 0.1, 0.3, 1, 3, 10 UNIT/V
outputAC output (BNC connector) Maximum output voltage ±10V (±1V/FS) However
, range 300 has a maximum of ±3.16V and range 1,000 has a maximum of ±1V
DC output (DSUB connector) Maximum output voltage +10V (+1V/FS)
Range 300 up to +3.16V, Range 1,000 up to +1V
Noise level (typ.)Full-band: (1) [0.008pCrms + 0.005pCrms for every 1,000pF of input capacitance],
whichever is greater, or (2) 5mV (RMS)
Narrow-band: 0.5Hz, 100pC/V・・・10μV/√Hz
20~1,000Hz, 100pC/V・・・1μV
full band (mV): (1) 10μVrms input conversion value or ②5mVrms, whichever is larger
AccuracyWithin 1.5% for all ranges at 1,000 Hz and input capacitance of 1,000 pF or less
filterLPF: 1,000Hz, 10,000Hz (-12dB/OCT)
HPF: 3Hz, 10Hz (-12dB/OCT)
temperature, humidity range-20°C to +60°C, 90% RH or less
power supplyDC±9V~±15V, or AC100~240V power supply unit can be
used when built into multi-channel storage case with AC adapter
dimensions, massDimensions: 34.5 (W) x 99 (H) x 152 (D) mm Refer to outline drawing
Weight: Approx. 350g

 

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top