Japan, SK Sato
SK Sato PC-3710 2-ch. Min-Max Digital Thermometer
Made in: Japan
Manufacturer: SK Sato
Model: PC-3710
PC-3710, a digital thermometer, monitors two locations simultaneously with an internal sensor and a 3-meter-long external probe. The external probe detects temperatures as low as -50°C, and the internal sensor measures down to -5°C. This device also displays minimum and maximum temperatures.
Feature
Two channels of temperatures
– Displays temperatures at the internal sensor (IN) and the external probe (OUT) simultaneously.
Maximum and minimum temperatures shown by simple key presses
IPX5 waterproof
– Safe to use in an environment with water splashes
Resolution 0.1°C
– Good for precise monitoring
Be hygienic
– Contains antimicrobial in the body.
– The sensor component of the external probe consists of hygienic stainless steel.
Three ways to install
Description
How to check minimum (MIN) and maximum (MAX) temperatures
Short press of the key changes the view in the order of the current, MAX, MIN temperature, and goes back to the current temperature.
MIN and MAX reset under either of these conditions: replacing the battery or pressing the key for 3 seconds.
Specifications
| Cat. No. | 1850-00 | |
| Product name | 2-ch. Min-Max Digital Thermometer | |
| Model name | PC-3710 | |
| Measuring range | Internal sensor | −5.0 to 50.0°C |
| External probe | −50.0 to 70.0°C | |
| Accuracy | ±1.0°C (0.0 to 40.0°C) ±2.0°C (other) | |
| Resolution | 0.1°C | |
| Sampling time | 10 seconds * Temperatures of internal sensor and external probe measured alternately every 5 seconds | |
| Indicated items | Simultaneous display of temperatures at internal sensor and external probe | |
| Waterproofness | IPX5 waterproof Resists water only when the connector cap is closed, or the external probe is connected. Do not put the probe underwater. | |
| Operating ambient | −5 to 50°C, less than 80%rh without condensing | |
| Power | AAA battery x1 | |
| Battery life | Approx. 2 years under room temperature, with alkaline battery | |
| Material | Body | ABS resin with antimicrobial, silicone rubber |
| External probe | Sensor part: SUS304, PE resin Cable: PVC resin (heat-resistant up to 50°C) | |
| Dimensions | Body | 67 (W) × 65 (H) ×22 (D) mm |
| External probe | Sensor part: Ø5.5 × 11 mm (resin part Ø7.9 mm) Cable: 3 m long | |
| Weight | 71 g including battery | |
| Accessories | AAA battery x1, clasp for holding external probe x1, instruction manual | |
