Clamp, Japan, Lifting, Super Tool
Super Tool SSC0.5N/1N/2N Screw Cam Clamp (Single Eye Type)
Product Made in Japan
Manufacturer: Super Tool
Model: SSC0.5N/1N/2N
First time in the Clamp Industry!! Tightening can be made from the operator’s side!!
* In case of overhead beam:
* In case a steel plate or a steel beam is placed near to or on the floor
Features
- Most suitable for lifting down a chain block/hoist structured steels and horizontally pulling structured steels.
- When used in horizontal pulling, the screw can be easily tightened from the top (Operators can tighten the screw when installing on to the beam over the head).
- Attention: Tightening torque of the screw should be more than 25N・m (Abt.250kgf・cm).
* Note: SSCN Clamp can not be used for products with the shape below:
Specifications
| Material | Special Alloy Steel |
|---|---|
| Finish | Champagne gold paint |
| Product Specifications | Capacity: 0.5 / 1 / 2ton |
| Product Specifications | Clamp Range: 0～25 / 0～40mm |
| Product Specifications | Attachment: 17×21 Double Ratchet Wrench (Short Type) |
Dimension Table
| Item No. | Capacity (ton) | Clamp range | L | L2 | H | H1 | H2 | H3 | ΦD1 | T1 | T2 | S | N.W. (kg) |
| SSC0.5N | 0.5 | 0~25 | 122 | 89 | 129.5 | 68 | 30 | 39 | 22 | 46 | 16 | 21 | 1.8 |
| SSC1N | 1 | 0~40 | 156 | 121 | 161 | 88 | 40 | 45 | 26 | 50 | 18 | 21 | 3.2 |
| SSC2N | 2 | 0~40 | 170 | 121 | 186 | 100 | 40 | 53 | 32 | 60 | 28 | 21 | 5 |
Other items of Super Tool
Request the quotation for Super Tool
Related Products
-
Tsugaru Kogyo No.8583 50 Square C-Type Joint
-
DIJET GMX Endmill Type QM MAX GII Roughing Cutter
-
Vessel No.GT-NR10L Air Nipper Round-Type without Lever
-
Kanetec EST-1 Electro Chuck Master Stand
-
IMADA CB-301 Digimatic Cable for DS2
-
Watanabe WGP-NHL 2-point setting alarm setter with LCD display – Signal Converter
REQUEST QUOTATION
PAYMENT
LINK
