Product Made In Japan
Manufacturer: TASETO
Model: NEWBRIGHT Pickling Acid

TASETO NEWBRIGHT is a one-liquid type pickling acid and removes oxide scales produced during welding and heat treatments of stainless steel without wearing off any of the austenitic matrix.

Applicable Materials

Austenitic stainless steel: SUS304, 304L, 321, 316, 316L, 301, 302, 309S, 310S, 347, 309, 310, 330.
Duplex stainless steel: S31803, TP2205, TP2507

Features

1. Processable at room temperature, and easy to apply because of one-liquid type.
2. Quick descaling and clean finish without damaging the matrix.
3. The coating of gel type #300E has excellent adhesiveness and extension, Usable
for all orientations.
4. Not only descaling, passivation can be done at the same time.
5. Do not contain chlorine.

Types and characteristics

How to use

1. Remove spatter/anti-spatter agents, oil, grease, and paint before application.
2. Brush #300E in a uniform film, or immerse the work into #300S, or spray #300X with a sprayer.
3. Rinse with water after pickling.
(Waste water must be treated according to local regulations).

Note on usage

TASETO NEWBRIGHTs contain nitric acid and hydrofluoric acid, use extreme care for safety.
1. Be sure to wear rubber or plastic PPE. (Goggles, face mask, gloves, overcoat, and boots)
2. Perform the pickling operation with good ventilation provided; be sure to put on a hose mask when working inside the tank or poorly ventilated enclosure.
3. Drain pickling water properly.

● Packing units

2-kg, 10-kg, 20-kg Polyethylene container.