Japan, TERAOKA SEISAKUSHO
TERAOKA SEISAKUSHO 5113 0.15 Epoxy Resin Impregnated Tape
Product Made in Japan
Manufacturer: TERAOKA SEISAKUSHO
Model: 5113 0.15
The No. 5000 series epoxy resin-based tape is an adhesive tape made with a highly adhesive liquid epoxy resin that hardens with heat.
Even hardening ensures a smooth-looking exterior and provides superior adhesive and electrical insulation properties.
Usage method
(1) Clean the object surface by removing all dirt, dust, moisture and oil.
(2) Apply the tape and add pressure.
(3) Apply heat to harden (recommended conditions: 150ºC x 30 minutes).
*Note: cool storage required.
Structure of 5113 0.15
Features
- Excellent initial adhesion strength(tack)
- Good for work
- With adhesive
Uses of 5113 0.15 Tape
- Electrical insulation and exterior of coil, transformers, etc
- Fixing parts requires strong shear adhesive strength
- For Fixing parts requires strong heat-resistant adhesive
Fixing parts required complete hardening
Overall thickness (㎜)
|
0.15
|
---|---|
Standard color
|
White, Black
|
Standard length (m)
|
30
|
Peel adhesion (N (gf) /W25㎜)
|
─
|
Tensile strength (N/25㎜)
|
94.0
|
Elongation (%)
|
3
|
Breakdown voltage (kV)
|
5
|
Shear adhesive strength (N/400㎟)
|
13200
|
Standards met
|
─
|
Other
|
Resin content 70%
|
The above data are typical examples measured using JIS or our corporate testing method.
RoHs2 directive 10substances are not contained.
Related Products
-
Kanetec PCMR POWERFUL PULLEY TYPE LOCUS SEPARATOR
-
SAKUSAKU VNMG160408-UG Turning Insert 35° Triangular/Negative
-
Furuto Industrial (Monf) ST Duct Sealing
-
Organo Fluid Carrier Type Anaerobic Treatment Equipment
-
SAKUSAKU SNGG120408R ISO Turning Insert Square/Negative
-
TSURUMI LSC SERIES Single Phase Submersible Pumps