Japan, TERAOKA SEISAKUSHO
TERAOKA SEISAKUSHO 647 0.05 Circuit Tape
Product Made in Japan
Manufacturer: TERAOKA SEISAKUSHO
Model: 647 0.05
No. 647 uses a polyester film that is coated with a highly heat and chemical resistant silicone adhesive.
There are 4 tape thicknesses available depending on adhesive thickness: 0.05, 0.08, 0.1 and 0.12mm. This tape can be used on various uneven surfaces and is optimal for plate masking in printed board terminal components.
Structure of 647 0.05
Features
- Heat resistance, Chemical resistance, Solvent resistance
- Less adhesive residue
- Good fit to printed circuit board
- 4 kinds of overall thickness
Uses
- For plating masking of terminals of printed circuit board
- Heat resistant masking
- Fixing parts required removability
- For fixing silicone rubber
- Fixing silicone-type release liner
Overall thickness (㎜) | 0.050 |
|---|---|
Standard color | Green |
Standard length (m) | 60 |
Peel adhesion (N (gf) /W25㎜) | 6.50(663) |
Tensile strength (N/25㎜) | 94.1 |
Elongation (%) | 80 |
Standards met | ─ |
The above data are typical examples measured using JIS or our corporate testing method.
RoHs2 directive 10substances are not contained.
Related Products
-
Shinano SI-2221 Single Action Polisher Standard Air Tools
-
Kitz AKTFLL,CTFLL Floating Type 600 Brass Ball Valves (Full Bore)
-
TONE 2BAF Series Socket Adaptor for Electric Drill, Flex Head
-
Murata Steel clamp 71050
-
Organo Sepia B-100 Activated Sludge Sedimentation Promoter
-
Watanabe RS7 [Sheathed RTD] with Lead Wire, Screw-in Type
