Japan, TERAOKA SEISAKUSHO
TERAOKA SEISAKUSHO 647 0.08 Circuit Tape
Product Made in Japan
Manufacturer: TERAOKA SEISAKUSHO
Model: 647 0.08
No. 647 uses a polyester film that is coated with a highly heat and chemical resistant silicone adhesive.
There are 4 tape thicknesses available depending on adhesive thickness: 0.05, 0.08, 0.1 and 0.12mm. This tape can be used on various uneven surfaces and is optimal for plate masking in printed board terminal components.
Structure of 647 0.08
Features
- Heat resistance, Chemical resistance, Solvent resistance
- Less adhesive residue
- Good fit to the printed circuit board
- 4 kinds of overall thickness
Uses
- For plating masking of terminals of printed circuit board
- Heat resistant masking
- Fixing parts required removability
- For fixing silicone rubber
- For fixing silicone-type release liner
Overall thickness (㎜) | 0.080 |
|---|---|
Standard color | Green |
Standard length (m) | 30、60 |
Peel adhesion (N (gf) /W25㎜) | 7.00(714) |
Tensile strength (N/25㎜) | 94.1 |
Elongation (%) | 80 |
Standards met | ─ |
The above data are typical examples measured using JIS or our corporate testing method.
RoHs2 directive 10substances are not contained.
Related Products
-
Eagle Jack (Konno Corporation) MM200-30 Holding Block
-
Chiyoda Seiki GS-140-FH Small flow/self-powered Pressure Regulator For Ethylene/Methane/Natural Gas (primary pressure: 8.0 MPa, 15.0 MPa or less/adjustment pressure 0.5 to 0.99 MPa, standard flow rate: 5 m3/h)
-
Chiyoda Seiki EPR-1000PHS Primary Pressure Control Valve Holding Pressure Valve (primary pressure: 20.0 MPa or less/set pressure 10.0 to 20.0 MPa, standard flow rate: 170 m3/h・Air)
-
NAGANO KEIKI ER31 Battery-less Pressure Sensor Machines
-
YOSHITAKE GP-1000S Pressure Reducing Valve – Steam
-
Seiwa E02S Gasket EMC Products
