Japan, TERAOKA SEISAKUSHO
TERAOKA SEISAKUSHO 647 0.12 Circuit Tape

Product Made in Japan
Manufacturer: TERAOKA SEISAKUSHO
Model: 647 0.12
No. 647 uses a polyester film that is coated with a highly heat and chemical-resistant silicone adhesive.
There are 4 tape thicknesses available depending on adhesive thickness: 0.05, 0.08, 0.1 and 0.12mm. This tape can be used on various uneven surfaces and is optimal for plate masking in printed board terminal components.
Structure of 647 0.12
Features
- Heat resistance, Chemical resistance, Solvent resistance
- Less adhesive residue
- Good fit to printed circuit board
- 4 kinds of overall thickness
Uses
- For plating masking of terminals of printed circuit board
- Heat resistant masking
- Fixing parts required removability
- For fixing silicone rubber
- Fixing silicone-type release liner
Overall thickness (㎜) | 0.12 |
---|---|
Standard color | Green |
Standard length (m) | 60 |
Peel adhesion (N (gf) /W25㎜) | 7.30(744) |
Tensile strength (N/25㎜) | 94.1 |
Elongation (%) | 80 |
Standards met | ─ |
The above data are typical examples measured using JIS or our corporate testing method.
RoHs2 directive 10substances are not contained.
Related Products
-
Risyo Angle Needle Valve Special Valve
-
Ascon ARL for pipe inner surface abrasive (tungsten) nozzle
-
LOBTEX SD5S Swaging Die Set
-
SAKUSAKU 2SS-40D 1.0S Carbide Square End Mill 2-Flute
-
Chiyoda Seiki MCH-100A Semi-automatic Switching Gas Supply Device Stand Set (standard flow rate: 50ℓ/min・Air)
-
NDV Glass lining diaphragm valves with excellent corrosion and chemical resistance