Japan, Tokyo Keiso
Tokyo Keiso R-100 Glass Tube Flowmeter
Made in Japan
Manufacturer: Tokyo Keiso
Model: R-100
R-100 is a series of Glass tube flowmeters. The flow rate of liquids and gases is indicated by the position of float and graduation on glass tube. No utility supply such as electricity and/or air for operation. The best cost effective flow measurement is possible.
Features
- Easy installation
No straight both for upstream and downstream is required for process installation. No utility supply is needed.
- Cost effectiveness
The pure mechanical construction offers most cost effective flow measurement.
- Direct observation of measuring fluid
In addition to flow rate measurement, the measurement fluids are directly observed for better process fluid quality control.
- Wide material selection
Besides the standard metallic material, resins and/or lining materials are available for corrosive fluids.
Specifications
| Measuring fluid | All kinds of liquids and gases (Not suitable for steam measurement) |
|---|---|
| Flow range | Liquids (Water at 20°C ) Max. 5,200 to 52,000L/h Min. 0.9 to 9L/hGases (Air at 0°C , 0MPa) Max. 100 to 1000m³/h(nor) Min. 0.015 to 0.15m³/h(nor) *Depending on the fluid and the float material |
| Meter size | 10A to 100A |
| Fluid temperature | Max. 120°C (Depending on the meter material) Allowable thermal shock: 80°C |
| Fluid Pressure | Max. 1.2MPa for 10A Max. 1.0MPa for 15A Max. 0.8MPa for 20A, 25A Max. 0.6MPa for 40A, 50A, 65A Max. 0.4MPa for 80A, 100A |
| Rating | JIS10K Flange (Option: ANSI, DIN Flange , Rc, NPT Thread) |
| Material |
|
| Indication Accuracy | ±1.5%F.S. (Depending on the meter material and the flow rate) ±2.5%F.S. (In case of resin float) |
| Range ability | 10 : 1 |
| Optional products | Not straight through design, Ribbed taped tube, Flow adjusting valve Special versions |
REQUEST QUOTATION
PAYMENT
LINK
