Japan, Tokyo Ko-on Denpa
Tokyo Ko-on Denpa CP600 Series Variable Attenuator
Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CP600 Series
Features
Conductive plastic resistor element used (Low rotational noise). 16mm square body.
300 degree operating angle. Highly dustproof.
Maximum number of interlocking circuits: 6
Electrical Specifications
Electrical specificationsCP600 Series
Products | *CP601*-* | ||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Attenuation direction [Load: high] | CCW (Large attenuation & cut off) – CW (Small attenuation) | ||||||||||||||||||||||||||||||||||||||||||||
Degrees (CCW to CW) |
|
||||||||||||||||||||||||||||||||||||||||||||
Circuit method | Ladder circuit | ||||||||||||||||||||||||||||||||||||||||||||
Total resistance (1-C) | 5kohm, 10kohm, 50kohm, 100kohm | ||||||||||||||||||||||||||||||||||||||||||||
Total resistance tolerance | ±20% | ||||||||||||||||||||||||||||||||||||||||||||
Attenuation accuracy [Load: high] | 0 – 10dB: ±1.0dB – 30dB: ±2.0dB |
||||||||||||||||||||||||||||||||||||||||||||
Matching accuracy [Load: high] | 0 – 10dB: 0.6dB – 30dB: 1.0dB |
||||||||||||||||||||||||||||||||||||||||||||
Insertion loss | 0.5dB or less | ||||||||||||||||||||||||||||||||||||||||||||
Cut off [15kHz] | 85dB Min. | ||||||||||||||||||||||||||||||||||||||||||||
Voltage proof | 1 Min. at AC500V | ||||||||||||||||||||||||||||||||||||||||||||
Insulation resistance | 50Mohm or more at DC500V | ||||||||||||||||||||||||||||||||||||||||||||
Max rating | 0.1W | ||||||||||||||||||||||||||||||||||||||||||||
Maximum input voltage | DC30V or less | ||||||||||||||||||||||||||||||||||||||||||||
Sliding noise level | 47mV or less (by JIS C 6443) | ||||||||||||||||||||||||||||||||||||||||||||
Rotational life | 100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV) |
* [Load: high] The output side load should be used with high impedance (20 times or more than the total resistance value). |
Mechanical Specifications
Mechanical specifications | CP600 Series |
---|---|
Operating angle | 300 degrees ±5 degrees |
Rotational torque | 0.1 to 1.2Ncm (Different by number of circuit) |
Strength Nut-Attached | 50Ncm |
Attached parts | Hexagonal nut (M8) |
Stopper strength | 50Ncm |
Push-pull strength | 50N |
General Specifications
General specifications | CP600 Series |
---|---|
Temperature range | -10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage) |
Relative humidity | 90%RH (No condensation) |
Related Products
-
Seiwa E04SR150718 Ferrite Core Split Cores SR, SRM and SRS Types EMC Products
-
Fujii Denko FS-76 Snap Hook
-
TAIYO NBH Series Press / Air-Oil (High Power System)
-
ASCO SIL3 Compatible Explosion-Proof 3-Way Solenoid Valve
-
Ascon Long Roll External Blasting Machine BAP-902 (Direct Pressure Type) Pipe roll blasting machine Blast Cabinet
-
Ross Asia Bantam series Port sizes 1/8 & 1/4; flow rates up to 11 scfm (312 l/min)