Japan, UHT CORPORATION
UHT Corporation No. 5 The Collets And Collet Nut For The Spindle

Made in Japan
Manufacturer: UHT CORPORATION
Model: No. 5 φ3.0
The collets and collet nut for Spindle No. 5.
The 6.0-mm collet is included in Spindle No. 5 or Kit No. 5 by default.
The collet’s nominal diameters are the maximum dimensions to be held.
Note that when the difference between the shank diameter and the collet’s nominal diameter increases, the runout will also increase.
For example, the 6.0-mm collet can hold the 5.5-mm shank, but not the 6.3-mm shank.
The accuracy will become low with the 5.1-mm shank.
Use the 5.0-mm collet for the shank diameters of 5.0 mm or less.
Note that these collets require a long lead time.
Main Specifications
Product name | The collets and collet nut for the Spindle No. 5 φ3.0 |
---|---|
Part number | 5009011 |
Related Products
-
LOBTEX DS-SS STLOCK Short Socket
-
Daitoukeiki SM11A type guage male type Sanitary Guages
-
TOYO KENSETSU KOHKI EMCH / EMCHB Column Lifting Set with Double Lock Clamp (EIKO)
-
Vessel No.GT-P6LSIII Air Screwdriver Clutch Type
-
NAC – TL TYPE Steel (Zinc-plated) SM (Male thread)
-
Niigata Seiki TSGA-15KD Aluminum Triangular Scale Ruler Kaidan (General Use)