Drilling and Cutting, Japan, Unika
UNIKA Bull Point/ Cold Chisel/ Cutter/ Scoop
Manufacturer: UNIKA
Model: Bull point, Cold chisel, Cutter (scaling chisel), Scoop, Bull point (for SDS-plus), Cold chisel (for SDS-plus), Tile chisel (for SDS-plus), Flat chisel (for SDS-plus), Bull point (for SDS-max), Cold chisel (for SDS-max)
- With low wear, these handle extended use with ease.
- ■Extremely durable cutting tip for powerful chiseling force.
◆Matching drill: Hammer drill/Hammer
Use
Concrete•Stone•Block•Brick•Mortar•
Slate
■Matching drill
| Maker | 17mm | 21mm | 30mm | 30mm×310mm | |
|---|---|---|---|---|---|
 | Hitachi |
|
|
| H90 |
| Makita |
| HM1201 |
| (8600N) | |
| Ryobi |
| (CH-485) |
- Use the drill appropriate for the drill bit used.
- Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
- Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so it will not loosen or come off.
- Wear eye protection glasses.
- Drill holes vertically against the drilled material surface.
- Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.
- SPECIFICATIONS
- Bull point
Size Hexagonal width(mm) HTB17X280 17 HTB17X450 HTB17X600 HTB17X700 HTB17X800 HTB17X1000 HTB21X320 21 HTB21X450 HTB30X410 30 HTB30X310 - Cold chisel
Size Hexagonal width(mm) HTC17X280 17 HTC17X450 HTC17X600 HTC17X800 HTC17X1000 HTC21X320 21 HTC21X450 HTC30X410 30 HTC30X310 
- Cutter (scaling chisel)
Size Hexagonal width(mm) HTK17X280 17 HTK21X320 21 HTK30X410 30 
- Scoop
Size Hexagonal width(mm) HTS17X400 17 HTS21X450 21 HTS30X480 30 
- ■With low wear, these respond to long time use with ease.
- ■Excellent durable cutting edge always ensures powerful chiseling force.
◆Matching drill: Rotary hammer drill
Bull point (for SDS-plus)
Size Shank dia(mm) HTB10X250 10 
Cold chisel (for SDS-plus)
Size Shank dia(mm) HTC10X250 10 
Tile chisel (for SDS-plus)Size Shank dia(mm) HTT10X260 10 
Flat chisel (for SDS-plus)
Size Shank dia(mm) HTF10X250 10 
- ■With low wear, these respond to long time use with ease.
- ■Excellent durable cutting edge always ensures powerful chiseling force.
◆Matching drill: SDS-max hammer drill/hammer
Bull point (for SDS-max)
Size Shank dia(mm) HTB18X280 18 HTB18X450 
Cold chisel (for SDS-max)
Size Shank dia(mm) HTC18X280 18 HTC18X450 
