Drilling And Cutting, Japan, Unika
UNIKA E&S FC Single-function Core Drill For Compound Materials
Manufacturer: UNIKA
Model: For compound materials FC type (Straight shank)/ For Compound materials FC type (SDS shank)
■Adopting unique double blade features, with the inner-blade preceding the outer-blade, boring through material such as; metallic siding, stainless steel/wood siding as well as compound materials (metallic plate + insulating material + plywood) at one go is possible.
■Swarf is efficiently discharged in boring wooden materials. It is also possible to bore through several layers of thin steel plates.
■SDS shanks are also available at the same price.
◆Effective Length: Please refer to the spec table.
◆Applicable electric tool: Electric drill/Percussion drill(rotating mode)
USES
Thin Steel Plates•Aluminum•Metallic Sliding Boards•2*4’s (also cutting nails)•Timber•Plywood•PVC panels•FRP•Plasterboard•Stainless Steel
■Cutting edge shape
PRECAUTIONS ON USE
- Use electric drills appropriate for the core drill used.
- Check that the main switch of the drill is turned off and make sure to disconnect the power supply plug from the socket before attaching to and detaching from the motor.
- Product main body, swarf and drilling surface are hot due to friction in drilling. Never touch them with bare hands.
- Wear work clothes suitable for operation. In particular, wear eye protection equipment to prevent shavings from getting into your eyes.
- Prepare the working environment before starting a job.
- Carefully read the instruction manual for the motor used before use.
<Dia> <Dia> <Dia>
25-40mm 45-70mm 75-120mm
(45*45*330) (75*75*325) (135*135*325)
*( ) The number inside is the package size. W*D*H(mm)
As for the size there is an error of ±2mm depending on the package.
SPECIFICATION
For compound materials FC type (Straight shank)
| Code | Cutting edge diameter(mm) | Code | Cutting edge diameter(mm) | Code | Cutting edge diameter(mm) | Code | Cutting edge diameter(mm) |
| ES-F25ST | 25 | ES-F50ST | 50 | ES-F85ST | 85 | ES-F130ST | 130 |
| ES-F29ST | 29 | ES-F55ST | 55 | ES-F90ST | 90 | ES-F150ST | 150 |
| ES-F32ST | 32 | ES-F60ST | 60 | ES-F95ST | 95 | ES-F155ST | 155 |
| ES-F35ST | 35 | ES-F65ST | 65 | ES-F100ST | 100 | ES-F160ST | 160 |
| ES-F38ST | 38 | ES-F70ST | 70 | ES-F105ST | 105 | ES-F170ST | 170 |
| ES-F40ST | 40 | ES-F75ST | 75 | ES-F110ST | 110 | ES-F180ST | 180 |
| ES-F45ST | 45 | ES-F80ST | 80 | ES-F120ST | 120 | ES-F210ST | 210 |
For Compound materials FC type (SDS shank)
| Code | Cutting edge diameter(mm) | Code | Cutting edge diameter(mm) | Code | Cutting edge diameter(mm) | Code | Cutting edge diameter(mm) |
| ES-F25SDS | 25 | ES-F50SDS | 50 | ES-F85SDS | 85 | ES-F130SDS | 130 |
| ES-F29SDS | 29 | ES-F55SDS | 55 | ES-F90SDS | 90 | ES-F150SDS | 150 |
| ES-F32SDS | 32 | ES-F60SDS | 60 | ES-F95SDS | 95 | ES-F155SDS | 155 |
| ES-F35SDS | 35 | ES-F65SDS | 65 | ES-F100SDS | 100 | ES-F160SDS | 160 |
| ES-F38SDS | 38 | ES-F70SDS | 70 | ES-F105SDS | 105 | ES-F170SDS | 170 |
| ES-F40SDS | 40 | ES-F75SDS | 75 | ES-F110SDS | 110 | ES-F180SDS | 180 |
| ES-F45SDS | 45 | ES-F80SDS | 80 | ES-F120SDS | 120 | ES-F210SDS | 210 |
| ES-F260SDS | 260 |
