Japan, Yoshitake
YOSHITAKE GD-29S-NE Pressure Reducing Valve – Water
Made in Japan
Manufacturer: Yoshitake
Model: GD-29S-NE
- Maximum Inlet pressure 2.0MPa, applicable to high pressure equipment of high-rise building, factory, plant.
- Can be installed in any piping direction, such as horizontal or vertical.
- Closed construction could keep no external leakage even if diaphragm damaged.*Water supply law standards conformity product(E-606).
Specifications
Features | For water, stainless steel, Max. 2.0MPa, JWWA approved, flanged | |
---|---|---|
Type | Direct-acting type | |
Specifications | Product type | Direct-acting type |
Nominal size | 20A (3/4″) – 100A (4″) | |
Application | Water | |
End connection | JIS 20KRF flanged | |
Inlet pressure | Max. 2 MPa | |
Reduced pressure | 0.2 – 0.7 MPa (*) | |
Min. differential pressure | 0.05 MPa | |
Max. pressure reduction ratio | 7 : 1 | |
Working temperature | 5 – 90 degree(C) | |
Material | Body | Stainless steel |
Valve | FKM | |
Valve Seat | Stainless steel | |
Diaphragm | Chlorine resistant EPDM |
Remarks
*Reduced pressure range
A:0.2-0.35MPa
B:0.3-0.7MPa
*Pressure gauge connection diameter is Rc1/4.
*20A-50A have built-in strainer(40mesh). 65-100A do not have strainer.
*Max. pressure reduction ratio depends on the set pressure.
Dimensions and Weights
Size | L(mm) | H(mm) | Weight(kg) | Cv value |
---|---|---|---|---|
20A(3/4) | 164 | 170 | 4.4 | 2.3 |
25A(1) | 164 | 170 | 5.4 | 3.5 |
32A(1 1/4) | 204 | 224 | 8.7 | 6 |
40A(1 1/2) | 204 | 224 | 9.0 | 7 |
50A(2) | 225 | 239.5 | 11.8 | 11 |
65A(2 1/2) | 225 | 329 | 21 | 21 |
80A(3) | 237 | 345 | 25.5 | 26 |
100A(4) | 290 | 412 | 40.5 | 38 |
Dimensional drawing
Related Products
-
Chiyoda Seiki EH-50-3/EH-100-3 Carbon Dioxide Gas Pressure Regulator With Electric Heater (with electric heater for carbon dioxide/maximum flow rate: 50ℓ/min, 100ℓ/min)
-
Obishi Keiki Seisakusho Leveling Block
-
Vessel No.NMCS Recessed SAKISUBO Bit With Bit Magnetizer/Demagnetizer
-
Kurimoto KRC Kneader -Twin Screw Continuous Kneader / Reactor
-
IMADA A-40/60,S-40/60 Compression Plates
-
Kurimoto KEX-25, KEX-30, KEX-40, KEX-50 Two-shaft Kneading And Extruding Machine Extruder