Japan
YP Jose Punch
Product Made In Japan
Model: YP Series
A punch for aligning holes in shaped steel and iron plates with holes made with punches and dies. Rivets of stacked shaped steel and iron plates
It is used for hole alignment before fixing with bolts.
| Model | Size × D × L × d1 × d2 × L1 × L2 × L3 | Weight (g) |
| 16mm/YP-16 | 16 x 19 x 160 x 9 x 14 x 90 x 45 x 25 | 250 |
| 19mm/YP-19 | 19 x 22 x 180 x 10 x 16 x 100 x 55 x 25 | 400 |
| 22mm/YP-22 | 22 x 25 x 200 x 12 x 18 x 115 x 60 x 25 | 600 |
| 25mm/YP-25 | 25 x 28 x 220 x 14 x 22 x 135 x 60 x 25 | 750 |
| 28mm/YP-28 | 28 x 32 x 240 x 16 x 23 x 150 x 60 x 30 | 1100 |
| 32mm/YP-32 | 32 x 36 x 260 x 17 x 28 x 165 x 65 x 30 | 1450 |
It is safe to select about 1/3 of the taper part (L1) from the body part (D) so that it matches the hole diameter.
● Material S45C / quenching hardness HRC40
Related Products
-
KITO Manual Hoists – Special Application Models
-
Tokyo Ko-on Denpa Correctohm-CM Series Axial Type Resistor
-
UHT CORPORATION MSG-3BSN L Air micro grinder Straight typeφ3 collet
-
Hammer Caster 420 SR / 420 SRP 100-150mm Caster
-
Kunimoto 0002050 KS Contact Plate for 50 square pipe (LL Model)
-
KGK SI Immersion Probe (Flat Focus)
