Japan, Tosoku
Tosoku RE45T Series Manual Pulse Generator
Product Made in Japan
Manufacturer: Tosoku
Model: RE45T Series
RE45T/V series are compact optical manual pulse generators that allow accurate and smooth manual motion for NC machine tools, industrial machines, etc.
Features
● Eco-friendly: RoHS compliant
● Various Options
-Terminal block mounted type/direct molding type
-Output circuit: CMOS, open collector, line driver
● Enclosed structure design
● Protection from flux
● 100PPR, 25PPR available
● Long life use
Specifications
Model | RE645T***5 | RE45T***1 | RE45T***D | RE45***T2 | |
---|---|---|---|---|---|
RE45V***5 | |||||
Application | 5V input | 12V input | Differential line | Photo coupler | |
Power Voltage | DC5V±10% | DC12V±10% | DC5V±10% | DC10.8Vto 26.4V | |
Current Power | ≦ 80mA | ≦ 60mA | ≦ 150mA (90mAtyp) | ≦ 60mA | |
Current Power |
≦ 30mA | ≦ 40mA | |||
Out put | CMOS (45T) 330Ωpull-up or open collector | 2.2KΩpull-up or open collector | RS-422A (Line driver) Receiver’s terminator : 100Ω for each signal | Open collector (Current out put type) | |
Out put voltage | level 1: (Power voltage –0.5V) ≦ | level 1: TR is ON | |||
Out put voltage (Pull up) |
level 0: ≦ 0.4V (No-load) | level 0: TR is OFF | |||
Collector voltage |
not more than DC30V or 50mA | not more than DC30V or 50mA | |||
Pulse per revolution | 100pulse/100Click or 25Pulse/100Click | ||||
Click torque | S: (Soft torque) 8 ~ 16mN.m | ||||
C: (Standard) 32 ~ 64mN.m | |||||
Rotational Durability | Over a million times | ||||
Protection against water |
2m water resistant (2h) |
||||
Operating Temperature | -10°C | ~ | 60°C | ||
14F | 140F |
Part number designation
Models | Supply | Out-put | Pulse Per Revolution | |
---|---|---|---|---|
RE45T1 M5 | 5V | 5V | 100PPR | Standard Model for 5V |
RE45T1 R1 | 12V | 12V | 100PPR | Standard Model for 12V |
RE45T1 05 | 5V | OC | 100PPR | |
RE45T1_01 | 12V | OC | 100PPR | |
RE45T1_02 | 24V | OC* | 100PPR | 12V-24V input, photo coupler only |
RE45T1 D5 | 5V | Differential Line* | 100PPR | Special model for noise resistance |
RE45T2_M5 | 5V | 5V | 25PPR | |
RE45T2 M1 | 12V | 5V* | 25PPR | 12V input, 5Voutput |
RE45T2_01 | 12V | OC | 25PPR | |
RE45T2_02 | 24V | OC* | 25PPR | 12V~24V input, photo coupler only |
RE45T2 D5 | 5V | Differential Line* | 25PPR | Special model for noise resistance |
*Differential Line: Connect with terminating resistance 100Ω(Based on RS-422 line receiver).
*5V: power voltage = 12V. Output voltage = 5V
*OC( For photo coupler): Output voltage/0level=transistor /OFF=Current/0
Dimensions (mm)
Precautions
Soldering | Temperature | Time |
Manual Soldering | Up to 350° | Within 3 seconds for each terminal |
Flow soldering | Up to 260° | Within 5 seconds for each terminal |
NOTE: Do not put pressure on terminal during heating or soon after.
Circuitry
Output Waveform
1) Turning the shaft clockwise would generate the signal A when the signal B outputs a low voltage (0);
2) Rotating the shaft counter-clockwise would generate the signal A when the signal B outputs a high voltage(1);