Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LUK-A-100KN LUK-A Tension/Compression Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LUK-A-100KN
The LUK-A is a a thin load cell for measuring tension or compression loads. It can be installed to where the height is limited. It also suitable for fatigue test where repeativite loads are applied continuously.
Features
• Compact & lightweight
• The service life can be extended by using under one-half of the rated capacity.
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | ±100 kN |
---|---|
Nonlinearity | Within ±0.1% RO |
Hysteresis | Within ±0.1% RO |
Repeatability | 0.05% RO or less |
Rated Output | 2 mV/V ±1 % |
Environmental Characteristics
Safe Temperature | -35 to 80ºC |
---|---|
Compensated Temperature | -10 to 70ºC |
Temperature Effect on Zero | Within ±0.005% RO/ºC |
Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
Safe Excitation | 15 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 350 Ω ±1% |
Output Resistance | 350 Ω ±1% |
Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 9 kHz |
Weight | Approx. 7.5 kg (Excluding cable) |
Safe Lateral Force Component | 5 kN |
Safe Moments | 500 N·m |
Degree of Protection | IP64 (IEC 60529) |
Dimensions
Related Products
-
Fujii Denko FS-55 Snap Hook
-
Vessel No.VCS-SG Color Sleeves (S-GREEN)
-
Chiyoda Seiki EX-400mkII-G3 Pressure Regulator For Laser Gas Cylinder (4 kinds of mixed gas He, N2, CO2, CO)
-
Super Tool AR430DV/DR/DY/DB/DC Safety Rope (With Direct Catch Hook) (Capacity: 1kg)
-
Hasegawa Electric HH-6A Audio Signaling and Light Emitting Type Non-Live-Part Indicator
-
Naniwa RB Shackle Lightweight Shackle