Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PGM-10KE PGM-E Small-sized Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PGM-10KE
The PGM-E is a small-sized pressure transducer with the flush diaphragm at the end.
Features
• A flush diaphragm ensures excellent response and dynamic characteristics.
• Various rated capacities
• TEDS-installed models are available.
Specifications
Performance
Rated Capacity | 1 MPa |
---|---|
Nonlinearity | Within ±1% RO |
Hysteresis | Within ±1% RO |
Rated Output | 1 mV/V or more |
Environmental Characteristics
Safe Temperature | 0 to 80ºC |
---|---|
Compensated Temperature | 0 to 60ºC |
Temperature Effect on Zero | Within ±0.1% RO/℃ |
Temperature Effect on Output | Within ±0.1%/℃ |
Electrical Characteristics
Safe Excitation | 5 V AC or DC |
---|---|
Recommended Excitation | 1 to 3 V AC or DC |
Input Resistance | 120 Ω ±2% |
Output Resistance | 120 Ω ±2% |
Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 3 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 22 kHz |
Material | Case: Stainless steel Liquid-contacting part: SUS 630 Screw: SUS 304 |
Weight | Approx. 65 g (Excluding cable) |
Degree of Protection | IP64 (IEC 60529) |
Mounting Screw | G3/8, male |
Standard Accessories | Gasket (Mild copper) |
---|
Dimensions
Related Products
-
Hammer Caster 740MR Caster For Shopping Carts
-
Kyowa PHC-B-20MP PHC-B Flush Diaphragm Type High-temperature Pressure Transducer
-
Vessel No.AD-24GPE Power Adapter
-
Nagasaki Jack NLA-303/503/NLG-303/503 Low-floor air/low-floor garage jack long type
-
Kunimoto 1866002 Rope Grip ST
-
MIKASA MTX-50 Tamping Rammer