Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PHC-B-20MP PHC-B Flush Diaphragm Type High-temperature Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PHC-B-20MP
The PHC-B is a flush-diaphragm type pressure transducer for measuring pressure at high temperature. It adopt thin-film strain gage formed by sputtering.
Features
• High frequency response
• Suitable for measuring pressure of highly viscous medium
• Easy to use due to flexlble and heat-resistant cable
Specifications
Performance
Rated Capacity | 20 MPa |
---|---|
Nonlinearity | Within ±0.5% RO |
Hysteresis | Within ±0.3% RO |
Repeatability | 0.2% RO or less |
Rated Output | 0.6 mV/V or more |
Environmental Characteristics
Safe Temperature | -30 to 240ºC (However, the upper limit temperature of the cable is 200 ºC, the limit temperature of the cable tip connector is -25 to 85 ºC) |
---|---|
Compensated Temperature | 23 to 230ºC (However, the upper limit temperature of the cable is 200 ºC, the limit temperature of the cable tip connector is -25 to 85 ºC) |
Temperature Effect on Zero | Within ±0.03% RO/ºC |
Temperature Effect on Output | Within ±0.03%/ºC |
Electrical Characteristics
Safe Excitation | 12 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 380 to 650 Ω |
Output Resistance | 380 to 650 Ω |
Cable | 4-conductor (0.08 mm2) fluoroplastic shielded cable, 3.1 mm diameter by 3 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 85 kHz |
Material | Case: SUS (Metallic finish) Liquid-contacting part: SUS 630 |
Weight | Approx. 70 g (Excluding cable) |
Degree of Protection | IP62 (IEC 60529) |
Mounting Screw | G1/8, male |
Standard Accessories | Gasket (Mild copper) |
---|