Eisen, Japan
Eisen CHT-FC Series Carbide Hand Taps For Casting
Made in Japan
Manufacturer: Eisen Co., Ltd.
Model: CHT-FC Series
About the Series
Features
It is suitable for mass machining of workpieces such as castings, brass, brass castings, etc. The base material is made of ultrafine grain cemented carbide alloy with excellent wear resistance and toughness.
Series Details
| Call | IC 1.5P | IC 3P | accuracy | L | I | d | K.I. | K | F |
|---|---|---|---|---|---|---|---|---|---|
| M1.4 x 0.3 | 11001 | 11101 | EL2 | 34 | 9 | 3 | Five | 2.5 | 3 |
| M1.6 x 0.35 | 11002 | 11102 | EL3 | 36 | 9 | 3 | Five | 2.5 | 3 |
| M1.7 x 0.35 | 11003 | 11103 | EL3 | 36 | 11 | 3 | Five | 2.5 | 3 |
| M2 x 0.4 | 11004 | 11104 | EL3 | 40 | 12 | 3 | Five | 2.5 | 3 |
| M2.3 x 0.4 | 11005 | 11105 | EL3 | 42 | 13 | 3 | Five | 2.5 | 3 |
| M2.5 x 0.45 | 11006 | 11106 | EL3 | 44 | 14 | 3 | Five | 2.5 | 3 |
| M2.6 x 0.45 | 11007 | 11107 | EL3 | 44 | 14 | 3 | Five | 2.5 | 3 |
| M3 x 0.5 | 11008 | 11108 | EL3 | 46 | 11 | Four | 6 | 3.2 | 3 |
| M4 x 0.7 | 11009 | 11109 | EL3 | 52 | 13 | Five | 7 | Four | 3 |
| M5 x 0.8 | 11010 | 11110 | EL3 | 60 | 16 | 5.5 | 7 | 4.5 | 3 |
| M6 x 1.0 | 11011 | 11111 | EL3 | 62 | 19 | 6 | 7 | 4.5 | 3 |
| M8 x 1.25 | 11012 | 11112 | EL4 | 70 | twenty two | 6.2 | 8 | Five | Four |
| M8 x 1.0 | 11013 | 11113 | EL3 | 70 | twenty two | 6.2 | 8 | Five | Four |
| M10 x 1.5 | 11014 | 11114 | EL4 | 75 | twenty four | 7 | 8 | 5.5 | Four |
| M10 x 1.25 | 11015 | 11115 | EL4 | 75 | 20 | 7 | 8 | 5.5 | Four |
| M10 x 1.0 | 11016 | 11116 | EL3 | 75 | 20 | 7 | 8 | 5.5 | Four |
| M12 x 1.75 | 11017 | 11117 | EL5 | 82 | 29 | 8.5 | 9 | 6.5 | Four |
| M12 x 1.5 | 11018 | 11118 | EL4 | 82 | 29 | 8.5 | 9 | 6.5 | Four |
| M12 x 1.25 | 11019 | 11119 | EL4 | 82 | twenty four | 8.5 | 9 | 6.5 | Four |
| M12 x 1.0 | 11020 | 11120 | EL3 | 82 | twenty four | 8.5 | 9 | 6.5 | Four |
| M14 x 2.0 | 11021 | 11121 | EL4 | 88 | 29 | 10.5 | 11 | 8 | Four |
| M14 x 1.5 | 11022 | 11122 | EL4 | 88 | twenty two | 10.5 | 11 | 8 | Four |
| M16 x 2.0 | 11023 | 11123 | EL5 | 95 | 29 | 12.5 | 13 | Ten | Four |
| M16 x 1.5 | 11024 | 11124 | EL4 | 95 | 29 | 12.5 | 13 | Ten | Four |
| M18 x 2.5 | 11025 | 11125 | EL5 | 100 | 35 | 14 | 14 | 11 | Four |
| M18 x 1.5 | 11026 | 11126 | EL4 | 95 | 29 | 14 | 14 | 11 | Four |
| M20 x 2.5 | 11027 | 11127 | EL5 | 105 | 35 | 15 | 15 | 12 | Four |
| M20 x 1.5 | 11028 | 11128 | EL4 | 95 | 29 | 15 | 15 | 12 | Four |
Related Products
-
UHT CORPORATION Rotary bars 4TBW Abrasives
-
Nakatani Kikai AA15A Chipping Hammer (Spring Type・Clutch Type・Right Hand Coil Spring)
-
YOSHITAKE AL-4T Safety and Relief Valve
-
Vessel No.SST5P BL SAKISUBO Torsion bits 5-piece Set
-
Kondotec E Type Form Tie (W5/8 Nut is separated)
-
Seiwa E10K Electromagnetic Wave Control Sheet EMC Products
