ENDO KOGYO, Japan, Lifting, Reel
ENDO KOGYO Servo Motor Type Cable Reel
Product made in Japan
Manufacturer: ENDO KOGYO
Product type: Servo motor type cable reel
This reel is equipped with a motor as the driving force.
This product supports high-speed winding, continuous operation, and frequent operation, as well as large diameter and long cables.
Motor-controlled synchronization with the motion of the moving object maintains the optimum cable tension.
Feature of Servo motor type cable reel
This reel uses a servo motor to wind up the cable. It’s a better choice for efficiency, energy saving, and cable longevity when compared to the inverter control type.
What’s special is that it has a unique feature called minimum tension control.
This feature works with the servo’s torque control to automatically manage the right winding force.
Moreover, this not only prevents cable damage but also slashes annual electricity usage by 97%, based on Endo testing. It’s perfect for large cranes that need to lift stuff vertically.
The servomotor, being a sophisticated power source, offers higher efficiency, energy savings, and longer cable life compared to the vector inverter system.
Here are some key points:
You can use it in challenging environments.
It uses Minimum Tensional Control for better torque control than the vector inverter system.
It generates a gentle winding force that extends the cable’s life more than the inverter system.
A combination of a Permanent Magnet motor and Minimum Tensional Control saves even more energy than the inverter system.
In Cable Replacement Mode, you can manually wind the reel forward and backward, ensuring easy and safe cable replacement.
The built-in control system in the reel body solves the headache of electrical work.
In short, this reel, with its servo motor, excels in winding cables
Applications
For from small or middle size equipments to large size and high frequency equipments, there is a wide range of acceptable applications.
Specifications of Servo motor type cable reel
Motor type Reel’s Specifications Comparative Table
Type | Servomotor reel | Inverter-dnven motor reel | Torque motor reel | |||||
SM15** | SM35** | VP15** | VP22** | VP30** | TMX100 | TMX200 | TMF400C | |
Motor Capacity | 1.5kW | 3.5kW | 1.5kW | 2.2kW | 3.0kW | 9.8 N-m | 19.6 N-m | 39.2 N-m |
Power | ø3 200 ~ 230V 50/60HZ | ø3 200 ~ 240V 50/60HZ | ø3 200/220V 50/60Hz | |||||
ø3 380 ~ 480V 50/60Hz | ø3 380 ~ 480V 50/60HZ | ø3 400/440V 50/60Hz | ||||||
Rating | Continuous | Continuous | Continuous | |||||
Protective Structure | Equal to IP44 | Equal to IP44 (only reel part) | Equal to IP44 | Equal to IP33 | ||||
Torque Control | Torque control by a servo set | Torque control by a vector inverter | Voltage controled torque motor | |||||
Minimum tensional control / Stable torque control | ||||||||
Stable torque control | ||||||||
Sip ring | 20. 50.100A | 20. 50.100.150. 200.300A | 20.50.100.150. 200.300A | |||||
Attachment | — | Electnc control box Regenerate resistor urat | — | |||||
Main application | Vertical retrieve (Crane etc.) | Horizontal retrieve (Moving troley etc.) | Vertical retrieve Horizontal retrieve | |||||
Electrical Efficiency (•) | ◎(95Hcut) | ◎(90Hcut) | △ | |||||
Simplted control device | O (built-in control unit) | △ (built-in control unit) | ◎ | |||||
Cable life | ◎ | O | △ | |||||
Quietness | ◎ | ◎ | △ | |||||
Easy torque control | ◎ | O | ◎ | |||||
Manual winding in/out | ◎ | ◎ | △ | |||||
Against a hostile ervronment | O | ◎ | O | |||||
High speed winding | ◎ | ◎ | O | |||||
Low speed winding | ◎ | ◎ | ◎ | |||||
Heavily loaded windog | ◎ | ◎ | O | |||||
Maintenance span | Long | Long | Long | Short |
These percentages are estimated on appropriate conditions based on TME400C as 100% and depend on the customer usage.
NOTE:
1. The comparative data above is based on the general usage.
2. Servomotor reel and Inverter-driven motor reel are jointly developed products by Hitachi Plant Technologies, Ltd, and Endo Kogyo Co.. Ltd.
Kouei is Distributor/Agent of Endo Kogyo.
Other items of Endo Kogyo
Request the quotation for Endo Kogyo
Related Products
-
SAKUSAKU 2SS-40D 8.0S Carbide Square End Mill 2-Flute
-
Ascon BCE-3 (suction type) Tumbler automatic machine Blast Cabinet
-
SAKUSAKU RFSS-20D 8.0 Carbide Roughing End Mill 3~4 Flute
-
Kansai Kogu HB Series Chisel
-
Miyawaki TB9BN-C Temperature Control Steam Trap
-
SK Sato SK-270WP, S270WP-01 Waterproof Digital Thermometer With Probe