Fukuda Seiko, Japan
Fukuda 4140 Steel (Peck Drilling) Tribo-MAM Advanced tools



Made in Japan
Manufacturer: Fukuda Seiko
Model: 4140 Steel (Peck Drilling)
Features
The “MAM” in Tribo-MAM is an acronym for Modulation Assisted Machining, which is a vibration cutting technology that vibrates cutting tools.
It creates a momentary space between the blade and the material for better chip handling and lubricity.
This reduces the life of the drill and extends the life of the tool.
- Increase the production efficiency of small-diameter deep hole processing.
- It is ideal for deep hole drilling in difficult-to-cut materials.
- Tool life can be extended.
- The chips will be finer, so it will be easier to process.
- Drill: Guhring HSS TiN Coated Twist Drill
- Baseline Parameters:
- Rotational Speed: 10,000 rpm
- Feed Rate: 0.005 mm/rev
- Drill Size: Ø 0.320 mm, Length = 2.5 mm
- Coolant: Blaser Vascomill 10
Optimized with TriboMAM:
- Eliminated pecking cycles
- Cycle time reduced by 60%
- Tool life increased by 3 times
use
- Small-diameter deep hole drilling, such as bone screws and engine valve drilling
- Capable of deep hole drilling into difficult-to-cut materials
- Coolant through reduces heat generation
- Reduced tool wear and longer life
Collet Size: ER11

Holder size:
φ19.05 mm,
φ20 mm,
φ22 mm, etc.
controller

Controller Size
・432 (L) × 330 (D) × 89 (H) (mm)
Related Products
-
Vessel No.970 MEGADORA Clip Remover
-
TONE K700 Combination Tool Set
-
Nihon Flux High-speed Precision Weigher (Octobucket Type) Base Weight (Set of 2) Standard
-
Hammer Caster 940L Trivalent Chromate Conversion Coated Caster
-
Osaka Gensokuki Reducer For Vertical Mill
-
Yamamoto Keiki The Velocity Of The Wind Measurement Flange