Hasegawa Electric, Japan
Hasegawa Electric HST-1.5N High Voltage Detector
Made in Japan
Manufacturer: Hasegawa Electric
Model: HST-1.5N
Features
Short length, lightweight
When stowing, it is easy to carry.
Positive indication
The device with flashing high luminous red LED light and intermittent distinct electronic buzzer sounds easy to perceive.
Waterproof
The sensor is enclosed tightly, preventing failure due to dirt, water, and other foreign objects.
Dimension
Specification
| Working voltage range | AC | 600V~7000V |
| DC | ||
| Frequency | 50/60Hz | |
| Operation starting voltage (Voltage to Ground) | AC/DC 400V ±20% | |
| Dielectric strength | Between contact to and grounding terminal 14000V AC, 5min | |
| Leakage current | 1 mA or less at the dielectric strength test | |
| Battery life | About 4 hr. in a continuously operating state | |
| Operating temperature range | -10’C~ +40’C | |
| Weight | About 3400 (main body only) | |
*Internal circuit diagram
When the tip contacts the electric DC line, the current flows according to the below chart.
This current is amplified in the circuit, lighting the lamp and making the buzzer sound, thus the detector indicates whether the subject line is charging or not.
* In the case of AC, the current flows according to the below chart.
So the device works without a lead wire for earthing.
Other items of Hasegawa Electric
Request the quotation for Hasegawa Electric
Related Products
-
Obishi Keiki Seisakusho Granite V Block
-
Miyakawa C-86 Multi-axis attachment type C
-
Chiyoda Seiki RsC-3/RsC-3D Large Flow/piston/diaphragm Pressure Regulator (primary pressure: 3.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 2300 m3/h・Air)
-
Chiyoda Seiki Mid-sized Dual-use Device
-
Watanabe WJF-PA34 Power monitoring unit – Remote I/O
-
Hammer Caster 434E-FR Rubber Wheel
