Hasegawa Electric, Japan
Hasegawa Electric HTE-610 type Low Voltage Detector
Made in Japan
Manufacturer: Hasegawa Electric
Model: HTE-610 type
Features
- Conductive rubber provides a high level of safety
- Sensitivity adjustable
- Detector designed with the minimum variance of sensitivity between bare and covered conductor.
Specifications
Working voltage range | ACS0V to 600V common use for 50/60Hz |
Operation starting voltage
(Voltage to ground) |
Detection sensitivity is adjustable at shipment from the factory. Default:AC40V±l0V, contacting to the insulated wire(600V-N . 2mm) according to Hasegawa’s standard |
Battery | LR44(1.SVl x 2ocs |
Battery life | New battery about 10 hours for continuous operation, Syears for storage |
Weight | 22q (I including batteries) |
Dimension
How To Use
How to make contact with the detector
To detect voltage correctly, make contact with the side of the tip to ensure a large contact area. If not, capacitance decreases and operating sensitivity becomes low.
Voltage detection for shield cable is not possible.
The voltage detector does not work because of the electrical shielding layer which is grounded.
Sensitivity adjustment
Sensitivity adjustment can be made when it is required for some reasons such as below.
① Detection is not possible over the outer surface of the insulated cable.
② It is required to reduce the influence of induced voltage of the area etc.
Other items of Hasegawa Electric
Request the quotation for Hasegawa Electric