Chemical, Isolite Insulating, Japan
Isolite Insulating JIS C series Insulating Firebrick
Manufacturer: Isolite Insulating
JIS C series Insulating Firebrick
Features
Increase the strength of compression, and it is used when the strength is insufficient in JIS B series
JIS C series brick are brick that increase the strength of compression, and it is used when the strength is insufficient in JIS B series. It is used for place of load-bearing, vibration or wear for various industrial furnace.
Typical Applications
Hot Surface lining insulation of Industrial furnace
Quality
| C1 | C2 | C3 | ||
| JIS Classification | 1300-1.10-0.50 | 1400-1.20-0.60 | 1500-1.25-0.68 | |
| Specification | Permanent Linear Change at Not more than ±2% when tested at（℃） | 1300 | 1400 | 1500 |
| Bulk Density g/cm3 | 1.10≧ | 1.20≧ | 1.25≧ | |
| Thermal Conductivity at 600℃[W/m・K] JIS R 2616 | 0.50≧ | 0.60≧ | 0.68≧ | |
| Test Result | Bulk Density g/cm3 | 1.06 | 1.14 | 1.15 |
| Cold Crushing Strength [MPa]JIS R 2615 | 4.4 | 5.7 | 11 | |
| Thermal Conductivity at 600℃[W/m・K] JIS R 2616 | 0.44 | 0.52 | 0.62 | |
| Permanent Linear Change (%) at ( )℃X12hr | -0.7 | -0.8 | -0.1 | |
| (1300) | (1400) | (1500) | ||
Related Products
-
Watanabe TW-2B 2 Output Potentiometer Converter – Signal Converter
-
H.H.H Masonry Chain Sling
-
UHT CORPORATION φ20#150 Blue Cup Wheel
-
Kanetec KEC-32ASE Round Electromagnetic Chuck (Star Pole type)
-
Kanetec KMDTR Tunnel Type Demagnetizer
-
Chiyoda Seiki TKR-1000 Series Large Flow Self-powered Pressure Regulator (Primary pressure: 20.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 570 m3/h・Air)
