Manufactuer: Kaneko Sangyo
Model: M15DG Series

Summary

Typically, a four-way solenoid valve operates the double-acting cylinder.

A four-way solenoid valve mainly has five pipe connecting ports: one inlet, two outlets, and two exhaust ports. Since it is always closed, the exhaust port provides one of the four directional functions.

A double latch solenoid, with two coils inside, allows valve switching by energizing one of the coils. The valve does not switch to self-holding form, even if a power outage occurs after energization.

Feature

Hard anodized aluminum coats the inner sliding parts, allowing them to slide easily and operate without oil lubrication, preventing sticking and slipping, and providing excellent wear resistance.

The main parts, made of aluminum alloy, are compact and light.

Replacing AC and DC coils is easy because both fit into the same casing.

Anti-corrosion treatment with hard anodized aluminum ensures high corrosion resistance.

The Ministry of Labor certifies these explosion-proof type valves.

The main valve, a balance piston type, switches by a control piston without needing a spring. This design prevents malfunctions caused by spring action, even after long periods of inactivity.

A manual button allows for operation checks or testing.

Reliable operation occurs at a minimum pressure of 0.1 MPa, as no air loss is produced.

These valves can also function as three-way valves by selecting three out of the five ports.

Standard specification

FLUID : CLEAN AIR
FLUID TEMPERATURE : －20～60℃
AMBIENT TEMPERATURE: －20～60℃
DUTY CYCLE: 100% CONTINUOUSLY RATED
OPERATING VOLTAGE RANGE: ＋10，－15％
WORKING PRESSURE : 0.1 ～ 0.99MPa
Cv. FLOW FACTOR: 0.87
ELECTRICAL SPECIFICATIONS: See below

ELECTRICAL SPECIFICATIONS

AC		DC
V/Hz	A	V	A
GENERAL PURPOSE TYPE 12PRS, EXPLOSION-PROOF TYPE E12PRS		COIL INSULATION CLASS:B
100/50	0.052	24	0.260
100/60	0.052	48	0.120
110/60	0.058	100	0.062
200/50	0.040	110	0.067
200/60	0.040	125	0.076
220/60	0.043

Product Image

M15DG GENERAL PURPOSE TYPE

M15DG-8～10 GENERAL PURPOSE TYPE(MANUAL OPERATION)
NOMINAL DIAMETER	MOUNTING LENGTH	H(Non MANUAL OPERATION)
8	60	153(131)
10	60	153(131)

M15DG EXPLOSION-PROOF TYPE

M15DG-8～10 EXPLOSION-PROOF TYPE(MANUAL OPERATION)
NOMINAL DIAMETER	MOUNTING LENGTH	H(Non MANUAL OPERATION)
8	60	172(150)
10	60	172(150)

M15DG DUST EXPLOSION-PROOF TYPE

M15G-8～10 DUST EXPLOSION-PROOF TYPE(MANUAL OPERATION)
NOMINAL DIAMETER	MOUNTING LENGTH	H(Non MANUAL OPERATION)
8	60	224(202)
10	60	224(202)