,

Kanetec KE-R ELECTRO MAGNETIC HOLDER

Product Made in Japan
Manufacturer: Kanetec
Model: KE-R (KE-2R,KE-3RA,KE-4RA)

Application

Suitable as a hand of industrial robots for transportation of press workpieces that are small and light to make them difficult to release by their weight only.

Features

  • All models except for KE-2R use special cables with high durability against bending and vibration.
  • The spring force from the projection at the center of the attractive face swiftly releases the workpiece. you can adjust the spring force to suit the conditions of the workpiece.
  • You can attract and release the workpiece smoothly.
  • Finished by plating.
  • Usable continuously. ※Use these holders for workpieces whose surface where the holder comes in contact is not rough or has no holes. These holders are not suitable either for thin sheets that may be deformed by the pressing force.

Specifications

ModelNominal SizeMax. Holding PowerCenter Tapped Hole on BackVoltage
KE-2Rφ20 (0.78) × 25 (0.98)5N (0.5kgf)M * 5(0.19) * 0.8(0.03) Depth 5 (0.19)24 VDC
KE-3RAφ30 (1.18) ×25 (0.98)40N( 4kgf)M * 6(0.23) * 1(0.03) Depth 6 (0.23)
KE-4RAφ40 (1.57) ×25 (0.98)100N (10kgf)M * 6(0.23) * 1(0.03) Depth 7.5 (0.29)
ModelCurrentApplicable RectifierMass
KE-2R0.04AKR-T101A-6/24

RH-M303A-6/24、-C1,C2

RH-M105B-24

50g/0.11 lb
KE-3RA0.09A100g/0.22 lb
KE-4RA0.12A200g/0.44 lb
  1. The projection is provided in the center of the attractive face; φ2 φ max. length 1mm for KE-2R and φ2.5 φ max. length 1 mm for KE-3RA and 4RA.
  2. Cord length 0.3 m (0.2 m lead for KE-2R only).
  3. The max. holding power is based on a test piece of SS400, 10 mm thick, ground surface held on the whole area.

Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top