Japan, Kansai Electric Heat Corp
Kansai Electric Heat Corp KD Series T.S.K Hot-air Generator

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: KD Series
Features
Continuous use max. hot-air temp. 350゚C
Discharge pressure is more than 12kPa.
Hot-air circulation of 160゚C can be correspond at all type. (Energy saving !)
Specification
Model | Type | Power | Heater | Continuous use max. temp. | Motor capacity | Max. air volume | Max. static presuure |
50/60Hz | capacity | (m3/min) | (kPa) | ||||
KD-24H3 | 3200-3C-1.5HY-LB | 3-phase 200V | 3kW | 350゚C | 1.5kW | 7.1 | 12.1 |
3200-5C-1.5HY-LB | plus minus 10% | 5kW | |||||
3200-7.5C-1.5HY-LB | 7.5kW | ||||||
KD-56H3 | 3200-9C-2.2HY-LB | 9kW | 2.2kW | 10 | 13.5 | ||
3200-12.5C-2.2HY-LB | 12.5kW | ||||||
KD-72H3 | 3200-15C-3.7HY-LB | 15kW | 3.7kW | 18 | 13.5 | ||
3200-20C-3.7HY-LB | 20kW | ||||||
KD-82H2 | 3200-20C-5.5HY-LB | 20kW | 5.5kW | 27.8 | 13.2 | ||
3200-30C-5.5HY-LB | 30kW | ||||||
KD-82H3 | 3200-20C-7.5HY-LB | 20kW | 7.5kW | 28.5 | 18.4 | ||
3200-30C-7.5HY-LB | 30kW | ||||||
KD-82H5 | 3200-320C-11HY-L | 30kW | 11kW | 24 | 24 |
Related Products
-
Vessel No.AMD7S “Cushion” Drill Bit Set (for steel) 7-Piece Set (O/D 2.8,3.0,3.5,4.2,4.5,5.0,6.0mm (1 each))
-
SAKUSAKU SA-4M-D Carbide Rotary Burr Cylinder Shape
-
SAKUSAKU 2SSB-R6 Carbide Ball End Mill 2-Flute
-
Flex System Hardware Flange
-
Super Tool GVC0.35E / 0.5E / 1E / 2E Lateral Lifting Clamp (Universal Shackle Type)
-
Nakatani Kikai FR0L Sand Rammer (Floor Type – Standing Work)