Japan, Kansai Electric Heat Corp
Kansai Electric Heat Corp SUS High-Blow Nozzle
Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: SUS
Specification
| Model | 50SUS | 65SUS | 75SUS | 100SUS | 125SUS |
| Bore of the inlet | φ50 | φ65 | φ75 | φ100 | φ125 |
| Adjustment range of slit width | 0.5 – 1.5mm | 1.0 – 2.0mm | 1.0 – 2.mm | 1.0 – 3.0mm | 1.0 – 4.0mm |
| Adjustment range of slit width | |||||
| Manufacturable | ･200mm – 1000mm | ･300mm – 1900mm | ･300mm – 1900mm | 500mm – 2400mm | 500mm – 2400mm |
| slit length | at slit width 0.5 – 1.0mm | at slit width 0.5 – 1.0mm | at slit width 0.5 – 1.0mm | ||
| ･300mm – 1000mm | ･300mm – 1500mm | ||||
| at slit width 1.1 – 2.0mm | at slit width 1.1 – 2.0mm | ||||
| Efficient use air-speed | ･25m/s – 120m/s | ･25m/s – 120m/s | ･50m/s – 150m/s | ･50m/s – 150m/s | ･25m/s – 150m/s |
| at slit width 1.0mm | at slit width 1.0mm | at slit width 1.0mm | at slit width 1.0mm | at slit width 1.0mm | |
| ･25m/s – 100m/s | ･25m/s – 100m/s | ･25m/s – 80m/s | ･25m/s – 80m/s | ･25m/s – 100m/s | |
| at slit width 1.5mm | at slit width 2.0mm | at slit width 2.0mm | at slit width 2.0mm | at slit width 2.0mm | |
| ･25m/s – 50m/s | ･50m/s – 100m/s | ||||
| at slit width 3.0mm | at slit width 3.0mm | ||||
| ･50m/s – 75m/s | |||||
| at slit width 4.0mm | |||||
| Heatproof temp. | Less than 350C | ||||
| Resisting pressure | Less than 49kPa | ||||
| Accuracy rating | Disorder of the air-speed of the right and left is less than plus minus 5% | ||||
Related Products
-
Watanabe WSP-HS Inverting converter (Reverse converter) – Signal Converter
-
Chiyoda Seiki Mini Save Series For Dry Safety Device/Torch Side Mounting
-
UNIKA UR21 VL Series Percussion Long Body
-
Vessel No.A20ZB55 “BARITORI” Full Tread Burring Bit (For M8,3/8″,M10,M12 (Steel))
-
Nagasaki Jack NTE-SN1/2/SS1/2/LN1/2/LS1/2 Tire safety enclosure
-
Tosei Sharyo S-3000 V, S-3150 L, S-3650 Type, S-3750 Flat Series Heavy-weight Door Roller
