Japan, Kansai Kogu
Kansai Kogu Chisel For Hand Breaker
Product made in Japan
Manufacturer: Kansai Kogu
Model: CB-10 (CA-7), CB-20, CB-30, CB-35, TPB-40
Kansai Kogu Chisel For Hand Breaker is a chisel used in the CB-10, CB-20, CB-30, CB-35, TPB-40 hand breaker.
Specification
For TBP-40 |
|||||
Product Number | Product Name | Total length (mm) | Quantity per Box |
Stock |
|
5104000000 | Breaker chisel | 450 | 10 | O | |
5404000450 | Narrow chisel | 450 | 10 | – | |
5304000000 | Cutter 75 width | 450 | 10 | O |
*1:O Standard stock item – Made=to-order items
We can manufacture products with a total length of 2000mm or more but less than 5000mm. However a separate freight charge will be requires for items over 2000mm
For CB-35 |
|||||
Product Number | Product Name | Total length (mm) | Quantity per Box |
Stock |
|
5103500000 | Breaker chisel | 530 | 10 | – | |
5403500000 | Narrow chisel | 530 | 10 | – | |
5303500000 | Cutter 75 width | 530 | 10 | – |
For CB-30 |
|||||
Product Number | Product Name | Total length (mm) | Quantity per Box |
Stock |
|
5103000470 | Breaker chisel | 470 | 10 | O | |
5103000600 | 600 | 5 | O | ||
5103000800 | 800 | 1 | – | ||
5103001000 | 1000 | 1 | – | ||
5103001500 | 1500 | 1 | – | ||
5103002000 | 2000 | 1 | – | ||
5403000470 | Narrow chisel | 470 | 10 | – | |
5403000600 | 600 | 5 | – | ||
5303001000 | Cutter 75 width | 470 | 5 | – | |
A cutter holder for the breaker is required. (sold seperately) |
For CB-10 (CA-7) |
|||||
Part Number | Product Name | Total Length (mm) | Number in box |
stock |
|
52E0000400 | Pick Steel | 400 | 10 | O | |
52E0000450 | 450 | 10 | O | ||
5200000600 | 600 | 10 | O | ||
5200000800 | 800 | 1 | O | ||
5200001000 | 1000 | 1 | O | ||
5200001500 | 1500 | 1 | O | ||
5200002000 | 2000 | 1 | – | ||
5400700400 | Narrow Chisel | 400 | 10 | – | |
5400700450 | 450 | 10 | – | ||
5400700600 | 600 | 10 | – | ||
5300700000 | Cutter 75mm (with spring) | 450 | 5 | O | |
530C70N000 | Cutter 75mm (without spring) | 450 | 5 | O | |
530S700000 | Spade 90mm (with spring) | 450 | 5 | O | |
530S714000 | Spade 140mm (with spring) | 410 | 5 | O |
For CB-20 |
|||||
Part Number | Product Name | Total Length (mm) | Number in box |
Stock |
|
51E2000400 | Breaker Chisel | 400 | 10 | O | |
51E2000450 | 450 | 10 | O | ||
5102000600 | 600 | 10 | O | ||
5102000800 | 800 | 1 | – | ||
5102001000 | 1000 | 1 | O | ||
5102001500 | 1500 | 1 | O | ||
5102002000 | 2000 | 1 | – | ||
5402000400 | Narrow Chisel | 400 | 10 | – | |
5402000450 | 450 | 10 | – | ||
5402000600 | 600 | 10 | – | ||
5302010000 | Cutter 75mm (with spring) | 400 | 10 | O | |
54U20T0294 | Single Pipe Driving Chisel | 294 | 1 | O | |
54U20P0314 | Vibratory Driving Chisel | 314 | 1 | O | |
A cutter holder for the breaker is required. (sold seperately) |
|||||
5302E0000 | Blade edge 75 width | 235 |
|
O | |
5302S0000 | Sleeve | 125 | O | ||
5302R0000 | Lot | 250 | O | ||
42RS082600 | Tambor butt 200 #826 | – | 4 | O |
- Kouei is Distributor/Agent of Kansai Kogu
- Other items of Kansai Kogu
- Request the quotation for Kansai Kogu
Related Products
-
Kondotec Stainless Wire Rope
-
O-Ban INOAC Rubber Sponge
-
Yutani D, DH Impact Screwdrivers (Pistol Standard Type)
-
Eagle Jack (Konno Corporation) ED-100TST Hydraulic Bottle Jack
-
Chiyoda Seiki KR-120HS/KR-120HS-H (Primary pressure: 15.0 MPa or less / Adjusted pressure 2.0 to 12.0 MPa)
-
SANKO ELECTRONIC LABORATORY TO-250D Pinhole And Holiday Detectors