● Clean and remove dirt, moisture, oil, etc. from the installation area.

After determining the mounting position, attach it firmly with the double-sided tape attached to the namispot. In the case of adhesive, apply the adhesive to the other party or the other party, and then glue and cure.

[Note]

1. When installing, remove moisture, oil, dust, etc. from the mounting part.
   (If there is adhesion or unevenness on the adhesive surface, the adhesive strength may be weakened.) ）
2. Depending on the material of the adhesive surface, pigment and tape marks may adhere.
3. If you use it outdoors and use the included double-sided tape, the adhesive strength will decrease due to rain and wind, etc., and it will easily peel off. In that case, it is recommended to use glue.
4. At high temperatures, low temperatures, and humidity, the adhesive strength may be weakened.
5. Avoid re-applying after gluing.

merit

• ・ The material is soft PVC and can be used for a long time. (Some materials differ depending on the product.) ）
• ・ Various sizes.
• ・ There is no color transfer like rubber.
• ・ You can also choose the construction method.
• ・ When made of rubber sponge, it has excellent cushioning.

demerit

• ・ There are few color variations.
• ・ Most of them are straight line specifications.
• ・ If the material is soft PVC, it does not have the same cushioning as a rubber sponge.
• ・ If it is made of rubber sponge, it is easy to tear and deteriorate over time.

Construction example

• ・ Protective materials for pillar corners and walls in parking lots, factories, schools, public facilities, etc.
• ・ Cushioning material for the wall of the parking lot
• • Overhead cushioning
• ・ Cover of the rising part of the flower bed of the nursery school or kindergarten