, ,

KONAN RV6 Precision Regulators

Product Made In Japan
Manufacturer: KONAN
Model: RV6

The nozzle flapper high-sensitivity pilot amplification system has achieved adjustable sensitivity of 0.001MPa. Large relief flow enables strong resistance against excessive pressure at the secondary side and prevents reverse flow. This regulator is suitable for balancer and tension control.

Model Code

RV6

Specifications

● Do not use fluid containing oil.
● For use below 5℃, provide adequate measures against freezing.
● For specifications other than those listed above, please contact us.
● Minimal leakage may occur due to the diaphragm performance characteristics. This does not affect the regulator function at all.

Characteristics

Outside Dimensions

Operating Instructions

1. Installation

● In principle install RV6 precision type regulator vertically (so that the wheel comes either top or bottom).
● Install in the correct direction as indicated by an arrow mark on the body to make sure correct airflow.

2. Fluid

● For air supply to the primary side, filtrate the fluid using an air filter with filtration less than 5μm.
● When high-temperature air reaches the nozzle of the pilot valve, oil film may be created on the surface of the nozzle.in order to avoid this, use an after-cooler or dryer.

3. Lubrication
● Do not lubricate the regulator.
● When lubricating downstream components using a lubricator in the open air, perform the process at the secondary side of the regulator

4. Bracket

● A bracket is available as an option. For mounting, remove the wheel and lock nut(cramp)and inset the bracket.

5. Pressure
● Turn the wheel while checking the pressure regulator to set pressure. (Turn clockwise to increase the pressure and counterclockwise to decrease the pressure.)
● Set the primary pressure about 0.1 MPa higher than the second set pressure. If there is no pressure difference, available flow volume is decreased.
● Fasten the lock nut tight if it is necessary to avoid vibration and maintain a set position.

RV6


 

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top