Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa EDX-200A-1 Max 8 channels, 1 slot EDX-200A Universal Recorder
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: EDX-200A-1 Max 8 channels, 1 slot
- Equipped with a real-time digital filter 8th order digital filter can acquire beautiful waveforms.
High-speed/low-speed dual sampling Fast and slow phenomena can be measured with a reduced amount of data.
A high-speed sampling of all channels at 10kHz simultaneously (at 32 channels)Simultaneous measurement of 100 channels at up to 3kHz is possible
Can be used in high and low-temperature environments (EDX-200A-4T only) Supports -20°C~65°C - One-wire synchronization (other than EDX-200A-1)
Up to 8 units, can be used for large-scale measurement with distributed arrangement.
Feature
A compact and high-end EDX that supports a wide variety of measurements with a wide selection of conditioner cards while maintaining the convenience of the EDX-100A.
Specification
Model Name | EDX-200A-1 (w/DCS-100A) EDX-200A-1-1 (w/DCS-100A, DCS-101A) |
---|---|
Measurement object | Strain (gauge, transducer), voltage, thermocouple, pulse (F/V), piezoelectric acceleration (built-in amplifier), CAN signal |
Analog Input | EDX Series Conditioner Card Strain/Voltage/Acceleration Measurement Card CVM-41A Strain/Voltage Measurement Card CDV-40B/40B-F Dynamic Strain Measurement Card DPM-42B DPM-42B-FDPM-42B-I DPM-42B-I-F Thermocouple Card CTA-40A F/V Converter Card CFV-40A Charge Amplifier Card CCA-40A/40A-F CAN Card CAN-41A strain/voltage measurement isolation card CDV-44AS/46AS AD converter card AD-40AS/40AS-F [Note] The CFV-40A has mounting limitations. |
CAN data input | CAN card (2 ports, maximum 256 channels): CAN-41A(*) CAN-41A can be mounted in the final slot |
Voice memo input | 1-channel (input voice memos can be recorded together with measurement data) Remote control unit RCU-42A (sold separately) Data playback software DAS-200A (sold separately) is used to play back recorded voice memos. |
sampling
Sampling method | All channels simultaneously |
---|---|
Sampling Mode | Normal: Acquire all channels at the same sampling frequency Dual: Acquire two different sampling frequencies per channel:fast or slow |
sampling frequency | In normal sampling mode [1/2/5 series] 1Hz~100kHz 1Hz~2kHz : When CAN-41A data is measured [2nSeries】 2Hz~65536Hz 2Hz~2048Hz :CAN-41A High-speed sampling (Sf) in dual sampling mode duringdata measurement [1/2/5 series] 1Hz~100kHz 1Hz~2kHz : CAN-41A data measurement [2 nSeries: 2Hz~65536Hz 2Hz~2048Hz : nSeries】 |
Measurable number of channels | 320000 in normal sampling mode / integer part of “set sampling frequency”, except 32 in
320000-channel dual sampling mode / integer part of “set sampling frequency”, but up to 64 channels for CAN data at the time |
Programmable sampling frequency | The high-speed sampling frequency in dual sampling mode below(320000/”number of channels”) is (320000/”number of channels”) or less * About the “high-speed + low-speed” setting channelTwo channels of acquired data per channel |
Digital Filters | Butterworth Filter (IIR) Filter Type: Low-pass Filter, High-Pass Filter Order: Number of Amplitudes at 1~8th Cutoff Point: -3dB Attenuation Characteristics: -6dB ×N dB/oct. (N is the order of the filter)* Can be used with a low-pass filter with a conditioner card Digital filter of CAN data cannot be applied |
---|---|
Data storage | CF Card Capacity : 128M~16GB (recommended by our company) Maximum data file size (data file size that can be acquired)
When the number of measurement repetitions is 1 time 4GB/1 data file When the number of measurement repetitions is 2 or more times 1GB/1 data file ( 1GB=1000000000 bytes) |
Indicator | Channel status display LEDs: 8 LEDs Main unit status display LEDs: 4 pcs |
Operation switch | REC/PAUSE:Start Acquisition/Stop AcquisitionSTOP:Stop AcquisitionBAL .: Balance (Balance Adjustment)LOAD:Read and Set Conditions from CF CardOPT.:Execute Optional Functions SetPOWER :Power SwitchUSB / LAN: Communication I/F switching |
External Control Connector | CONT. IN (for remote control) |
Communication Interface | USB (USB2.0 High Speed) 1-Port Connector Shape : Series B Receptacle LAN (10/100BASE-T)2-Port LAN IN : PC Communication |
Synchronous operation | incompatible |
How to set conditions | Online setting: Set on PC via LAN or USB interfaceOffline setting:
Set by reading the setting conditions in the CF card into the instrument (DCS-100A is used to create measurement conditions) |
Saving Conditions | Conditioner setting conditions and measurement conditions can be stored in EDX’s built-in nonvolatile memory, and data can be acquired immediately under the previous measurement conditions. |
Measurement mode
Manual measurement/trigger measurement/interval measurement | |
Manual measurement | It is possible to start and stop data acquisition by user operation, or stop acquisition with a set number of data, and record voice memos at the time of this measurement. |
Trigger measurement | Automatic acquisition function (Note) Triggering with CAN data acquired by CAN-41A is not possible under preset trigger conditions. |
Interval measurement | Combination of Measurement Modes in Dual Sampling Mode for Automatic Acquisition Function Under
Predetermined Interval Conditions: |
Start/Stop Acquisition | Executed by PC, operation switch (panel surface), dedicated remote control |
---|---|
Balance adjustment operation (balance operation) | Strain input channel balance adjustment is performed by a personal computer, operation switch (panel surface), or dedicated remote control. |
Acquired Data Format | Analysis is possible using the DAS-2A data analysis software sold separately in the KS200 Republican standard format. |
Data recovery | Online collection by PC or offline collection by reading CF card directly into PC |
TEDS function | [Compatible conditioner cards] CDV-40B(-F), DPM-42B(-F),DPM-42B-I(-F),CCA-40A(-F),CDV-44AS,CDA-44AS, CDA-45AS,CVM-41A |
power | DC 10~33V connector type : RM12BRD-4PH (Hirose Electric) DC power supply or AC adapter (sold separately) |
Current consumption | Approx. 1.0A (DC 12V, 40 CDV-1B mounted) |
Operating temperature range | 0~50℃ |
Operating humidity range | 20~90%(non-condensing) |
Storage temperature range | -20~60℃ |
Vibration resistance | 49.0m/s2 (5G), 5~55Hz 1 cycle 1 minute, 15 cycles per axis (non-operating) 29.4m/s2 (3G), 5~55Hz 1 cycle 1 minute, 15 cycles per axis (operating) |
Impact resistance | 294.2m/s2(30G)/11ms |
External dimensions | 148(W)×53(H)×257(D)mm not including protrusions |
mass | Main unit: Approx. 0.9kg (Approx. 40.1kg when one CDV-1B is mounted) |
Conformity directives | EMC Directive 2014/30/EU RoHS Directive 2011/65/EU,(EU ) 2015/863(10 substances) |
Standard Accessories | DC Power Cable P-76 USB Cable N-38 Ground Wire P-72 Mounted in CF Card (1GB) SlotEDX AccessoriesBagDynamic Data Acquisition Software DCS-100A(DVD) *The model name ends with “- If it is “0”, DCS-100A will be sold separately. Instruction manual (Japanese/English, DVD) |
---|---|
Sold separately | AC Adapter UIA200-345 for EDX-12A (UNI345-1238 for the U.S.) Fixed Adapter EDX Dummy Panel EDX1P-DUMMY Remote Control Unit RCU-42A Monitor Unit EMON-20A |
Dimensions
Remarks
EDX-200A-2H/4H: CE compatible products can also be manufactured. Please contact us.