,

Kyowa GTI-E201-500KPS GTI-E201-S Plate type soil pressure gauge

Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: GTI-E201-500KPS

Measures subsoil pressure without disturbing the ground at the installation site.When installing the soil pressure meter, measurements can be made by simply drilling and inserting a bore hole at the soil pressure measurement point, without extensive excavation, shaping, or backfilling of the installation site. Earth pressure can be measured without disturbing the condition of the soil pressure measurement location.

Features

No need for extensive open excavation and backfilling during installation

Specification

Performance

Rated capacity 500 kPa
non-linearity Within ±1%RO
hysteresis Within ±1%RO
Rated output 1mV/V (2000×10 -6 strain) or more
Environmental characteristics
Allowable temperature range 0 to 80°C
Temperature compensation range 0~60℃
Temperature effect on zero Within ±0.1% RO/°C
(Note) Characteristics of the sensor unit alone
Temperature effect on output Within ±0.1%/°C
(Note) Characteristics of the sensor unit
Electrical characteristics
Allowable applied voltage 10V AC or DC
input resistance 350Ω±2%
output resistance 350Ω±2%
cable 0.5mm 2 , 4-core shielded chloroprene 50m, outer diameter 11mm, bare tip
Mechanical properties
Allowable overload 150%
Exterior Anti-rust coating, stainless steel surface
Degree of protection IP68 (permissible overload) (JIS C 0920)
others
Applicable geology soft cohesive soil

For correct use

●This device is made of a thin metal plate, so do not hit it with sharp objects or corners.
●The instrument can be inserted using a gas pipe, etc., but a jig is also available.
●When using by inserting, please use it on the ground with N value of 5 or less.

remarks

The mainland pressure gauge is a jointly developed product with the Regional Geoenvironmental Research Institute.

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top