Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LCK-A-200KN LCK-A Thin Compression Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LCK-A-200KN
The LCK-A is a compressive load cell with excellent accuracy, reliability, stability, and response.
Features
Thin
Hermetically-sealed structure with inert gas filled in
TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | 200 kN |
---|---|
Nonlinearity | Within ±0.5% RO |
Hysteresis | Within ±0.5% RO |
Repeatability | 0.05% RO or less |
Rated Output | 2 mV/V ±0.5% |
Environmental Characteristics
Safe Temperature | -30 to 80ºC |
---|---|
Compensated Temperature | -10 to 70ºC |
Temperature Effect on Zero | Within ±0.007% RO/ºC |
Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
Safe Excitation | 20 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 350 Ω ±0.5% |
Output Resistance | 350 Ω ±0.5% |
Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 5 m long, bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 12.6 kHz |
Weight | Approx. 3.5 kg (Excluding cable) |
Degree of Protection | IP67 (IEC 60529) |
Optional Accessories | Saddle CA-50B |
---|
CA-50B
Saddle
Object Product Model | LC-20TV LCV-A-500KN LCK-A-200KN LCH-10TF, 20TF LCR-B-100KNS7 |
---|---|
Hexagon Socket Head Bolt | M10 |
Weight (Approx.) | 1.8 kg |
Related Products
-
Nakatani Kikai NC3 Chipping Hammer (Straight Type・Chisel Holder Type)
-
Vessel No.GT-1600VPX Air Impact Wrench Super Light V-Hammer
-
Hammer Caster 405-15B Decorative Chromate Coated Caster
-
SAKUSAKU 2SS-30D 3.0S Carbide Square End Mill 2-Flute
-
KONAN CP611 Pneumatic Cylinder General Standard Type
-
BP-B1/BP-B2 Punching Table