Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PAL-200KB PAL Current-output Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PAL-200KB
The PAL is a current-output pressure transducer with a built-in amplifier. It is strong against noise and output signals of 4 to 20 mA. 2 types are available, PAL-A is a cable-integrated one and PAL-B a connector-equipped one.
Features
• Compact & lightweight
• High frequency response
• Measure pressure of high viscous medium possible
Specifications
Performance
Rated Capacity | 20 MPa |
---|---|
Nonlinearity | Within ±0.3% RO |
Hysteresis | Within ±0.3% RO |
Current Output | 4 to 20 mA |
Environmental Characteristics
Safe Temperature | -20 to 70ºC |
---|---|
Compensated Temperature | -10 to 60ºC |
Temperature Effect on Zero | Within ±0.03% RO/ºC |
Temperature Effect on Output | Within ±0.03%/ºC |
Electrical Characteristics
SN Ratio | 50 dB or more |
---|---|
Load Resistance | 0 to 500 Ω |
Frequency Response (Built-in Amplifier) | DC to 1 kHz, (Sensitivity deviation: ±10%) |
Power Supply | 24 VDC (21 to 30 V), 30 mA or less |
Cable | 4-conductor (0.18 mm2)vinyl shielded cable, 4.6 mm diameter by 3 m long, Sensor side: Terminated with a connector plug R06-P5F Measuring instrument side: Bared at the tip (use 3 conductors only) (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Material | Case: SUS (Metallic finish) Liquid-contacting part: SUS 630 |
Weight | Approx. 85 g (Excluding cable) |
Degree of Protection | IP52 (IEC 60529) |
Mounting Screw | G3/8, male |
Standard Accessories | Gasket (Mild copper) |
---|
Dimensions
Related Products
-
Kurimoto Roller Tire And Table Segment For Roller Mill
-
Watanabe A1000 Series A1□1B Digital panel meter for process signals – DC Meter
-
MIKASA MT-77HRL Tamping Rammer
-
Kyowa PGM-02KG PGM-G Low Pressure Transducer
-
Saitama Seiki U-TOOL U-71 Tip Sander
-
TERAOKA SEISAKUSHO 631S #12 Polyester Film Adhesive Tape