Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PDU-A-500KP PDU-A Stainless Steel Differential Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PDU-A-500KP
The PDU-A is a stainless steel differential pressure transducer for measuring differential pressure under line pressure of max 30 MPa. It has a built-in variable damping mechanism.
Features
• Corrosion resistant
• Overload protection mechanism
• TEDS-installed models are available.
Specifications
Performance
Rated Capacity | 500 kPa |
---|---|
Nonlinearity | Within ±0.2% RO |
Hysteresis | Within ±0.2% RO |
Repeatability | 0.1% RO or less |
Rated Output | 1.5 mV/V ±0.5% |
Environmental Characteristics
Safe Temperature | -30 to 90ºC |
---|---|
Compensated Temperature | -20 to 80ºC |
Temperature Effect on Zero | Within ±0.01% RO/ºC |
Temperature Effect on Output | Within ±0.01%/ºC |
Electrical Characteristics
Safe Excitation | 15 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 350 Ω ±1% |
Output Resistance | 350 Ω ±1% |
Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Maximum Line Pressure | 30 MPa |
Weight | Approx. 6 kg (Excluding cable) |
Dimensions
Remarks
Note 1: Stainless steel is used for liquid-contacting part.
Avoid measuring corrosive liquid or gas.
Note 2: If an overload of 30 MPa is applied to either high or low pressure side, the transducer is not damaged.
Related Products
-
Kyowa BLD-A-200KNS BLD-A-S Hollowed Load Cell
-
Chiyoda Seiki SGX-25N Small/Medium/Large flow/Pressure regulator/Governor Small/medium/large flow Rate Governor (primary pressure: 1.0 to 35.0 kPa/set pressure 0.5 to 20.0 kPa)
-
Tosei Sharyo W Series Wheel Gold Caster
-
Matsumoto Kikai HM-4040 ~ 6060 Manipulator
-
Miyakawa Without K type bracket Multi-axis attachment K type (round type)
-
Mikasa MCD-218CEH Concrete Cutter