Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PVL-100KA PVL Voltage-output Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PVL-100KA
The PVL is a voltage-output pressure transducer with a built-in amplifier. It is strong against noise. 2 types are available, PVL-A/B is a cable-integrated one and PVL-C/D a connector-equipped one. PVL-B/D output 0 to 5 V, and PVL-A/C output 1 to 5 V.
Features
• Compact & lightweight
• High frequency response
• Measure pressure of high viscous medium possible
Specifications
Performance
Rated Capacity | 10 MPa |
---|---|
Nonlinearity | Within ±0.3% RO |
Hysteresis | Within ±0.3% RO |
Voltage Output | 1 to 5 V |
Environmental Characteristics
Safe Temperature | -20 to 70ºC |
---|---|
Compensated Temperature | -10 to 60ºC |
Temperature Effect on Zero | Within ±0.03% RO/ºC |
Temperature Effect on Output | Within ±0.03%/ºC |
Electrical Characteristics
SN Ratio | 50 dB or more |
---|---|
Load Resistance | 1 kΩ or more |
Frequency Response (Built-in Amplifier) | DC to 1 kHz (Sensitivity deviation: ±10%) |
Power Supply | 12 VDC (10.5 to 15 V), 30 mA or less |
Cable | 4-conductor (0.14 mm2) chloroprene shielded cable, 6 mm diameter by 30 cm long, bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Materials | Case: SUS (Metallic finish) Liquid-contacting part: SUS 630 |
Weight | Approx. 85 g (Excluding cable) |
Degree of Protection | IP52 (JIS C 0920/IEC 60529) |
Standard Accessories | Gasket (Mild copper) |
---|
Dimensions
Related Products
-
Nakatani Kikai NAS5B‐CR Angle Grinder With Side Handle (Diamond Cutter, 5 Inch Type)
-
Kansai Electric Heat Corp HEPA-filter Box With The Heat Insulator
-
SAN-EI SEIKI VF Series Air Mixer
-
Kyowa KFRB 120 Ohm 1 Axis 5 Elements (For Stress Concentration) KFRB General Stress Measurement Gauge
-
H.H.H Hand Winch
-
Eagle Jack (Konno Corporation) G-100C Hydraulic Claw Jack