Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: TS40

Features

• Tool length measurement and tool breakage detection
  Installed on CNC machine tools to measure tool length to detect tool wear, thermal displacement, chipping and breaking of cutting edges, and prevent defective products from occurring.
• High repeatability
  Achieves repeatability of less than 1 µm
• High environmental resistance of IP67
  New air-actuated lift mechanism (Patent pending) Prevent failures caused by coolant and metal chips
• Long operating life of 5 million strokes
  Reliable non-contact magnetic detection principle.
  No wear or deterioration, ensuring long-term reliability.
• Low measuring force of 0.6±0.2 N
  Low measuring force allows small diameter tools to be used
• Over travel signal
  Outputs a Over travel signal to prevent damage when the tool accidentally drops beyond the measurement point

Specifications

Spezifikationen
*1 Under specific conditions defined by Magnescale Co., Ltd.(Refer to the dimensions) *2 When seen from the A direction in the above figure
Model name	TS40L2	TS41L2	TS42L2
Stroke length	10.5±0.5 mm
Reference point	1.0±0.5 mm
Reference point repeatability (at 20℃)	1 µm or less
Response speed range	5 to 3,000 mm/min
Number of strokes*1	5 million storokes
Protective design grade	IP67 (Main unit only)
Measuring force(at 20℃, reference point position)	0.6±0.2 N
Power consumption	0.5W
Inrush current	0.5A max. (Start up time after power on: 10 ms)
Output specifications	Transistor output (Photo coupler isolation) Between output – COM MAX200 V 0.5 mA to 0.1 A
OT position (Over travel)	5.0±0.5 mm from reference point position
Operating voltage range	DC12 to 24V
Air pipe position*2	Right	Center	Left
Operating temperature	0 to +50℃ (No condensation))
Storage temperature	-15 to +65℃ (90%RH max.)