,

Matsumoto Kikai PEV-10-S ~ 50-S EV 3-axis Positioner

Product Made in Japan

Manufacturer : Matsumoto Kikai

Model : PEV-10-S ~ 50-S

EV 3-axis positioner “TETSUJIN” has 3 axes (elevating, tilting, and rotating), and can position the workpiece in a position with good work efficiency, making it easy to obtain the optimum welding posture.

Features

  • 3-axis movement for optimum positioning!
    You can freely obtain welding postures that were difficult with conventional positioners.
  • Speedy rotation speed! (4 times compared to our company)!
    Speed ​​up the movement speed of each axis. In addition, the speed can be easily set by inverter control, so the efficiency is further improved with a sense of speed that matches the worker’s rhythm.
  • Elevating function that does not stress workers!
    Since the working height can be freely positioned, workers can concentrate on welding work without having to take an unreasonable posture.
  • Reliable fall prevention mechanism!
    A double safety mechanism prevents the lifting beam from falling.
  • Shut out dust from the outside!
    The drive section is fully protected by a cover to prevent troubles caused by dust, spatter, etc. In addition, since all three axes are electrically driven, maintenance work is not a hassle.
  • Smooth start/stop operation!
    Inverters are used for all three axes, enabling soft start and soft stop. In particular, it can be used safely and with peace of mind because it does not give impact to the main body of Tetsujin or the mounted work when it is stopped.
  • It is also possible to correspond to the external axis specification of the robot.

PEV-20-L PEV-50-L

PEV-20-L                                                                              PEV-50-L

Hollow chuck mounted type PEV-02-H

Hollow chuck mounted type PEV-20-H
A positioner for pipe welding that can chuck a workpiece with a hollow chuck.
<design registered>

motion

Lifting motion
By lifting the work to a height that is easy to work with, the optimum welding posture that does not burden the worker can be obtained.

   

Tilt movement
With the arm tilting function, it is possible to weld both the front and back sides of the workpiece just by setting it on the table once.

   

rotary motion
The table rotates endlessly. Even if there are multiple welding points, workers can perform welding work on the spot without moving.

   

■ Abundant optional functions

  • Teaching positioning function
    The stop position of the table can be set and stored in advance according to the work order, and the work position can be replayed each time the 1 step button is pressed. Greatly improves work efficiency.
  • Collision prevention function
    By setting the work size in advance, the mounted work will automatically stop before it interferes or collides with the main body of Tetsujin or the floor.
  • Servo motor specifications
  • Table rotation speed change function
    The table rotation speed can be easily adjusted with the pendant speed volume. Stable circumference welding can be easily performed at the optimum welding speed.
  • hydraulic rotary joint
    Equipped on the rotating shaft. Hydraulic oil can be supplied to hydraulic clamp jigs, etc. without any problems no matter how many times the table is rotated.
  • Signal tower
    The operating status is indicated by a lamp, melody, and alarm sound.

Specifications

Model display:  ① 05: 500kg load – 50: 5000kg load ② S: Short arm L: Long arm
Model PEV-10-S (L) PEV-20-S (L) PEV-30-S (L) PEV-50-S (L)
Maximum payload 1000kg 2000kg 3000kg 5000kg
Allowable center of gravity eccentricity of rotating shaft 115mm from table center 150mm from table center 150mm from table center 150mm from table center
Tilt axis allowable
center of gravity height
500mm from table surface 500mm from table surface 500mm from table surface 500mm from table surface
rotation range endless endless endless endless
Rotational speed 1.9rpm 2.7 rpm 2.1rpm 1.5 rpm
Allowable rotational
torque
1127 N・m 2940 N・m 4410 N・m 7350N・m
Tilt range ±180° ±180° ±180° ±180°
Incline speed 1.5 rpm 2.1rpm 2 rpm 2.3rpm
Allowable tilting
moment
4900 N・m 9800 N・m 14700 N・m 24500 N・m
lifting
stroke
1000mm 1100mm 1250mm 1400mm
lifting speed 59mm/sec 38mm/sec 30mm/sec 29mm/sec
Body mass 2100kg 3100kg 4100kg 7500kg
Rated current 20A 30A 30A 60A
Collecting ground
capacity
500A (Usage rate 50%)

Note) ●The power supply voltage is AC3φ200V 50/60Hz. ●Specifications are subject to change without notice, so please refer to them when ordering.

Dimensions

PEV-10-S (L) PEV-20-S (L) PEV-30-S (L) PEV-50-S (L)
A. 2531 (2881) 2929 (3279) 3152 (3502) 3838 (4288)
B. 2462 2652 3023 3333
C. 816 880 1027 1074
D. 1000 1100 1250 1400
E. 616 680 877 804
F. 1350 (1700) 1650 (2000) 1650 (2000) 2100 (2550)
G. 1520 1770 2030 2240
H. 400 600 600 980

* ( ) indicates long arm dimensions                                                                                                                    Unit: mm

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top