,

Maxpull Rotary manual winch GM series

Product made in Japan
Manufacturer: Maxpull
Model: GM-1 type / GM-3 type / GM-5 type / GM-10 type / GM-20 type / GM-30 type

Features

Base grade of Maxpull manual winch. With a built-in mechanical brake, the load can be lifted by turning the handle to the right and lowered by turning the handle to the left. The brake can be released (when there is no load).

Easy operability

Due to its high mechanical efficiency, the manual load during operation is very light compared to winches manufactured by other companies, making work easier. Due to its compact design, it is lightweight and very convenient to carry. In addition, the body can be easily fixed with the prescribed bolts. Another big feature is that each part is made by press processing, and the whole is assembled with bolts, so it can be easily disassembled. In the case of repair, anyone can easily perform repair and assembly by simply purchasing the parts and following the instruction manual.

Outstanding durability

All bearings use ball bearings from leading manufacturers. It is light to wind up and exhibits outstanding strength against wear. In addition, the speed reducer adopts our unique shifting method gear that has been subjected to special heat treatment, allowing work to be performed with ease. The mechanical brake also has a mechanism that allows you to freely adjust the gap, so it has excellent durability. In addition, the surface is completely prepped and baked on, so it is resistant to rust and can be used anywhere, and is unparalleled in robustness.

Safety you can trust

Carefully selected materials and advanced design and technology boast an extremely high level of safety. In particular, the parts where the load is applied intensively are combined with precision press-processed ribs or double plates to further increase strength. A double safety mechanism is adopted for the mechanical brake, so even if an impact is applied to the claw arm, no braking will occur. In addition, the wire rope is fixed to the drum with a double safety structure using a special drum that ensures waste winding. Wire rope ends can be fixed to the drum easily and securely with the included hexagonal L-shaped wrench. All are highly reliable and safe designs unique to our company.

Standard (brake releaseable) type

This type can release the brake by disengaging the stopper when there is no load.
Since the drum can be idled, it can be easily pulled out by removing the handle and then pulling the wire rope wound around the drum. The wire rope is usually stored in the drum, and it is convenient to pull out the wire rope only during work.

*Do not release the brake during vertical suspension. Please note that the brakes will not work and a fall accident will occur.

Specifications

Model GM-1 type GM-3 type GM-5 type GM-10 type GM-20 type GM-30 type
Wire rope tensile force 980N (100kgf)
wire rope winding 4th layer standard
2940N (300kgf)
6φ wire rope winding 5th layer standard
4900N (500kgf)
6φ wire rope winding 5th layer standard
9800N (1000kgf)
8φ wire rope winding 3rd layer standard
19600N (2000kgf)
9φ wire rope winding 3rd layer standard
29400N (3000kgf)
12φ wire rope winding 3rd layer standard
Wire rope capacity φ5mm×35m (6 layers winding) φ6×32m (6 layers winding) φ6×40m (6 layers winding) φ8×35m (5 layers winding) φ9×38m (5 layers winding) φ12×35m (4 layers winding)
Deceleration ratio 1/1 1/6.25 1/8.9 1/12.6 1/20 early winding 1/4 1/35.5
Handle operating force 1st layer: 143N (14.6kgf)
3rd layer: 187N (19.0kgf)
4th layer: 208N (21.2kgf)
1st layer: 76N (7.7kgf)
3rd layer: 103N (10.5kgf)
5th layer: 131N (13.3kgf)
1st layer: 109N (11.1kgf)
3rd layer: 142N (14.4kgf)
5th layer: 174N (17.7kgf)
1st layer: 133N (13.5kgf)
2nd layer: 157N (16.0kgf)
3rd layer: 182N (18.5kgf)
1st layer: 157N (16.0kgf)
2nd layer: 186N (18.9kgf)
3rd layer: 214N (21.8kgf)
1st layer: 137N (13.9kgf)
2nd layer: 169N (17.2kgf)
3rd layer: 201N (20.5kgf)
Handle length (effective maximum) 250mm 250mm 250mm 300mm 370mm 370mm
Weight (Body + Handle) 7.2kg 14.1kg 15.4kg 16.4kg 28.2kg 37.7kg

An example of a GM series usage site

 

 

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top