Japan, MAXPULL
Maxpull Small rotary manual winch 1LH series
Made in Japan
Manufacturer: Maxpull
Model: GM-1LH-SI-KEN type/GM-1LH-SW type/ESB-1LH-SI-KEN type/GM-3-SD60 type
Features
Important parts such as the mechanical brake are made robustly by using the same parts as the GM type. This winch is ideal for customers who value safety and reliability despite its small size. It has a good track record in equipment that requires a built-in winch, such as a pull-up curtain device.
Easy operability
Due to its high mechanical efficiency, the manual load during operation is very light compared to winches manufactured by other companies, making work easier. Due to its compact design, it is lightweight and very convenient to carry. In addition, the body can be easily fixed with the prescribed bolts. Another great feature is that each part is made by press processing, and the whole is assembled with bolts, so it can be easily disassembled. Even in the case of repair, anyone can easily repair and assemble by simply purchasing the parts and following the instruction manual.
Outstanding durability
All bearings use ball bearings from leading manufacturers. It is light to wind up and exhibits outstanding strength against wear. In addition, the speed reducer employs our unique shifting method gear that has been subjected to special heat treatment, allowing work to be performed with ease. The mechanical brake also has a mechanism that allows you to freely adjust the gap, so it has excellent durability. In addition, the surface is completely prepped and baked on, so it is resistant to rust and can be used in any work location.
Specifications
Model | GM-1LH-SI-KEN type | GM-1LH-SW type | ESB-1LH-SI-KEN type | GM-3-SD60 type |
wire rope tensile force | 980N (100kgf) 5th layer standard | 980N (100kgf) 5th layer standard | 980N (100kgf) 5th layer standard | 2940N (300kgf) 6φ wire rope winding 5th layer standard |
Wire rope capacity | φ4mm×22m (8 layers winding) | φ4mm×22m (8 layers winding) | φ4mm×22m (8 layers winding) | φ6×16m (6 layers winding) |
Deceleration ratio | 1/1 | 1/1 | 1/1 | 1/6.25 |
Handle operating force | 1st layer: 112N (11.4kgf) 3rd layer: 155N (15.8kgf) 5th layer: 197N (20.1kgf) |
1st layer: 112N (11.4kgf) 3rd layer: 155N (15.8kgf) 5th layer: 197N (20.1kgf) |
1st layer: 112N (11.4kgf) 3rd layer: 155N (15.8kgf) 5th layer: 197N (20.1kgf) |
1st layer: 76N (7.7kgf) 3rd layer: 103N (10.5kgf) 5th layer: 131N (13.3kgf) |
handle length | 200mm | 200mm | 200mm | 250mm |
Weight (Body + Handle) | 5.0 kg | 5.0 kg | 5.0 kg | About 13.0 kg |
Example of 1LH series usage site
Related Products
-
TSURUMI PUMP PARTS: PACKING LB-480/A LB-800/A LSR2.4S LSC1.4S Parts & Accessories
-
UHT HTSG-3S Air Micro Grinder
-
SAKUSAKU RFSS-35D 8.0 Carbide Roughing End Mill 4 Flute
-
Kanetec PCMR Powerful Pulley Type Separator
-
KONAN MVW7N-08-D 3 Port Solenoid Valves Large-Capacity Poppet-type (Hold)
-
TSURUMI PUMP PARTS: MTR PROTECTOR 115V-60HZ KA142-LABL22F Parts & Accessories