Drilling And Cutting, Hand Tools, Japan, Miyakawa
Miyakawa S Type Multi-axis Drill
Product Made in Japan
Manufacturer: Miyakawa
Model: S-96, S-130, S-160, , S-204, S-200
S-96 (For 2-axis pitch 10 mm to 100 mm)
Overview
A: Outer diameter of main shaft quill diameter B: Outer diameter of main shaft C: Length of main shaft end D: Outer diameter of flange of main shaft quill E: Thickness of flange of main shaft quill F: JT or MT number |
J Jacobs taper | M Morse taper | M Morse taper |
Performance specification
Model used Drilling machine | Screw used | Model | Types of chucks | Maximum axial distance (mm) | Minimum axis range of 4 axes (mm) | Minimum axis distance between two axes (mm) | Drilling ability per axis S45C (mm) | Screw standing capacity per axis S45C (M) | Maximum clamp diameter of chuck (mm) | Weight with 4 axes (kg) |
S – J 96 | C-4 | 83 | 41 | 10 | 3 | 3 | 4 | 4.8 | ||
C-6-14 * | 92 | 32 | 14 | 3 | 4 | 6 | 5.1 | |||
C-6 | 96 | 28 | 15 | 4 | 4 | 6 | 5.2 | |||
C-10 | 100 | 32 | 22 | 6 | 5 | 10 | 5.7 | |||
JT-D 5 | 100 | 39 | 27.5 | 4 | 3 | 5 | 5.6 | |||
JT-1 | 100 | 54 | 37.5 | 5 | 5 | 6.5 | 5.6 | |||
JT-2 | 100 | 65 | 45.5 | 6 | 5 | 10 | 5.7 | |||
S – 2M96 | C-4 | 83 | 41 | 10 | 3 | 3 | 4 | 6.5 | ||
C-6-14 * | 92 | 32 | 14 | 3 | 4 | 6 | 6.8 | |||
C-6 | 96 | 28 | 15 | 4 | 4 | 6 | 6.9 | |||
C-10 | 100 | 32 | 22 | 6 | 5 | 10 | 7.4 | |||
JT-D 5 | 100 | 39 | 27.5 | 4 | 3 | 5 | 7.3 | |||
JT-1 | 100 | 54 | 37.5 | 5 | 5 | 6.5 | 7.3 | |||
JT-2 | 100 | 65 | 45.5 | 6 | 5 | 10 | 7.4 | |||
S- 3 M 96 | C-4 | 83 | 41 | 1 | 3 | 3 | 4 | 7.0 | ||
C-6-14 * | 92 | 32 | 14 | 3 | 4 | 6 | 7.2 | |||
C-6 | 96 | 28 | 15 | 4 | 4 | 6 | 7.3 | |||
C-10 | 100 | 32 | 22 | 6 | 5 | 10 | 7.8 | |||
JT-D 5 | 100 | 39 | 27.5 | 4 | 3 | 5 | 7.8 | |||
JT-1 | 100 | 54 | 37.5 | 5 | 5 | 6.5 | 7.8 | |||
JT-2 | 100 | 65 | 45.5 | 6 | 5 | 10 | 7.9 | |||
※ C-6-14 uses a thin spindle. |
Use model icon
Geometry
Type S – J 96 | Model S-2M96 | Model S-3M96 |
The dimensions in the above figure are part of an attachable drilling machine and screw spindle. Detailed dimensions regarding actual model to be installed may be different, so please contact our service center. |
S-130 (for 2-axis pitch 19 mm to 130 mm)
Overview
A: Outer diameter of main shaft quill diameter B: Outer diameter of main shaft C: Length of main shaft end D: Outer diameter of flange of main shaft quill E: Thickness of flange of main shaft quill F: JT or MT number |
J Jacobs taper | M Morse taper | M Morse taper |
Performance specification
Model used Drilling machine | Screw used | Model | Types of chucks | Maximum axial distance (mm) | Minimum axis range of 4 axes (mm) | Minimum axis distance between two axes (mm) | Drilling ability per axis S45C (mm) | Screw standing capacity per axis S45C (M) | Maximum clamp diameter of chuck (mm) | Weight with 4 axes (kg) |
S – J 130 | C-6 | 130 | 30 | 19 | 5 | 5 | 6 | 6.7 | ||
C-10 | 130 | 32 | 22 | 7 | 6 | 10 | 7.6 | |||
JT-D 5 | 130 | 39 | 27.5 | 4 | 3 | 5 | 7.5 | |||
JT-1 | 130 | 54 | 37.5 | 6 | 5 | 6.5 | 7.0 | |||
JT-2 | 130 | 65 | 45.5 | 7 | 6 | 10 | 7.6 | |||
MT-1 | 130 | 37 | 26 | 7 | 6 | 14 | 8.0 | |||
S – 2 M 130 | C-6 | 130 | 30 | 19 | 5 | 5 | 6 | 7.6 | ||
C-10 | 130 | 32 | 22 | 7 | 6 | 10 | 7.7 | |||
JT-D 5 | 130 | 39 | 27.5 | 4 | 3 | 5 | 7.6 | |||
JT-1 | 130 | 54 | 37.5 | 6 | 5 | 6.5 | 7.6 | |||
JT-2 | 130 | 65 | 45.5 | 7 | 6 | 10 | 7.7 | |||
MT-1 | 130 | 37 | 26 | 7 | 6 | 14 | 8.1 | |||
S – 3 M 130 | C-6 | 130 | 30 | 19 | 5 | 5 | 6 | 7.4 | ||
C-10 | 130 | 32 | 22 | 7 | 6 | 10 | 8.1 | |||
JT-D 5 | 130 | 39 | 27.5 | 4 | 3 | 5 | 7.9 | |||
JT-1 | 130 | 54 | 37.5 | 6 | 5 | 6.5 | 8.0 | |||
JT-2 | 130 | 65 | 45.5 | 7 | 6 | 10 | 8.1 | |||
MT-1 | 130 | 37 | 26 | 7 | 6 | 14 | 8.3 | |||
S – 4M130 | C-6 | 130 | 30 | 19 | 5 | 5 | 6 | 7.5 | ||
C-10 | 130 | 32 | 22 | 7 | 6 | 10 | 8.2 | |||
MT-1 | 130 | 37 | 26 | 7 | 6 | 14 | 8.4 | |||
Use model icon (Click to go to the list)
Geometry
Model S-J130 | Model S-2M130 | Model S-3M130 |
The dimensions in the above figure are part of an attachable drilling machine and screw spindle. Detailed dimensions regarding actual model to be installed may be different, so please contact our service center. |
S-160 (for 2-axis pitch 19 mm to 160 mm)
Overview
A: Outer diameter of main shaft quill diameter B: Outer diameter of main shaft C: Length of main shaft end D: Outer diameter of flange of main shaft quill E: Thickness of flange of main shaft quill F: JT or MT number |
J Jacobs taper | M Morse taper | M Morse taper |
Performance specification
Model used Drilling machine | Screw used | Model | Types of chucks | Maximum axial distance (mm) | Minimum axis range of 4 axes (mm) | Minimum axis distance between two axes (mm) | Drilling ability per axis S45C (mm) | Screw standing capacity per axis S45C (M) | Maximum clamp diameter of chuck (mm) | Weight with 4 axes (kg) |
S – J 160 | C-6 | 150 (160) | 50 | 19 (25) | 5 | 5 | 6 | 12.3 | ||
C-10 | 160 | 40 | 25 | 8 | 6 | 10 | 13.1 | |||
C-13 | 160 | 47 | 33 | 10 | 8 | 13 | 20.7 | |||
JT-D 5 | 160 | 47 | 33 | 4 | 3 | 5 | 14.3 | |||
JT-1 | 160 | 54 | 37.5 | 6 | 5 | 6.5 | 14.4 | |||
JT-2 | 160 | 65 | 45.5 | 8 | 6 | 10 | 14.4 | |||
JT No. 6 | 160 | 76 | 53.5 | 10 | 8 | 13 | 18.9 | |||
MT-1 | 160 | 47 | 33 | 12 | 8 | 14 | 21.9 | |||
S – 2M160 | C-6 | 150 (160) | 50 | 19 (25) | 5 | 5 | 6 | 13.8 | ||
C-10 | 160 | 40 | 25 | 8 | 6 | 10 | 14.6 | |||
C-13 | 160 | 47 | 33 | 10 | 8 | 13 | 17.8 | |||
JT-D 5 | 160 | 47 | 33 | 4 | 3 | 5 | 15.8 | |||
JT-1 | 160 | 54 | 37.5 | 6 | 5 | 6.5 | 15.8 | |||
JT-2 | 160 | 65 | 45.5 | 8 | 6 | 10 | 15.9 | |||
JT No. 6 | 160 | 76 | 53.5 | 10 | 8 | 13 | 16.0 | |||
MT-1 | 160 | 47 | 33 | 12 | 8 | 14 | 18.6 | |||
S – 3 M 160 | C-6 | 150 (160) | 50 | 19 (25) | 5 | 5 | 6 | 13.8 | ||
C-10 | 160 | 40 | 25 | 8 | 6 | 10 | 14.6 | |||
C-13 | 160 | 47 | 33 | 10 | 8 | 13 | 17.8 | |||
JT-D 5 | 160 | 47 | 33 | 4 | 3 | 5 | 15.7 | |||
JT-1 | 160 | 54 | 37.5 | 6 | 5 | 6.5 | 15.8 | |||
JT-2 | 160 | 65 | 45.5 | 8 | 6 | 10 | 15.9 | |||
JT No. 6 | 160 | 76 | 53.5 | 10 | 8 | 13 | 16.0 | |||
MT-1 | 160 | 47 | 33 | 12 | 8 | 14 | 18.6 | |||
S – 4M160 | C-6 | 150 (160) | 50 | 19 (25) | 5 | 5 | 6 | 16.7 | ||
C-10 | 160 | 40 | 25 | 8 | 6 | 10 | 17.5 | |||
C-13 | 160 | 47 | 33 | 10 | 8 | 13 | 20.7 | |||
JT-D 5 | 160 | 47 | 33 | 4 | 3 | 5 | 18.7 | |||
JT-1 | 160 | 54 | 37.5 | 6 | 5 | 6.5 | 18.8 | |||
JT-2 | 160 | 65 | 45.5 | 8 | 6 | 10 | 18.9 | |||
JT No. 6 | 160 | 76 | 53.5 | 10 | 8 | 13 | 18.9 | |||
MT-1 | 160 | 47 | 33 | 12 | 8 | 14 | 21.5 | |||
Use model icon (Click to go to the list)
Geometry
S-J160 type | Model S-2M160 | Model S-3M160 | Model S-4M160 |
The dimensions in the above figure are part of an attachable drilling machine and screw spindle. Detailed dimensions regarding actual model to be installed may be different, so please contact our service center. |
S-200 (for 2-axis pitch 29.5 mm to 200 mm)
Overview
A: Outer diameter of main shaft quill diameter B: Outer diameter of main shaft C: Length of main shaft end D: Outer diameter of flange of main shaft quill E: Thickness of flange of main shaft quill F: JT or MT number |
J Jacobs taper | M Morse taper | M Morse taper |
Performance specification
Model used Drilling machine | Screw used | Model | Types of chucks | Maximum axial distance (mm) | Minimum axis range of 4 axes (mm) | Minimum axis distance between two axes (mm) | Drilling ability per axis S45C (mm) | Screw standing capacity per axis S45C (M) | Maximum clamp diameter of chuck (mm) | Weight with 4 axes (kg) |
S – J 200 | C-13 * | 200 | 42 | 29.5 | 10 | 8 | 13 | 19.4 | ||
JT-D 5 | 200 | 42 | 29.5 | 4 | 3 | 5 | 18.0 | |||
JT-1 | 200 | 54 | 37.5 | 6 | 5 | 6.5 | 18.0 | |||
JT-2 | 200 | 65 | 45.5 | 8 | 6 | 10 | 18.4 | |||
JT No. 6 | 200 | 76 | 53.5 | 10 | 8 | 13 | 18.5 | |||
MT-1 | 200 | 42 | 29.5 | 10 | 10 | 14 | 19.5 | |||
S – 2 M 200 | C-13 * | 200 | 42 | 29.5 | 10 | 8 | 13 | 20.4 | ||
JT-D 5 | 200 | 42 | 29.5 | 4 | 3 | 5 | 19.7 | |||
JT-1 | 200 | 54 | 37.5 | 6 | 5 | 6.5 | 19.8 | |||
JT-2 | 200 | 65 | 45.5 | 8 | 6 | 10 | 19.9 | |||
JT No. 6 | 200 | 76 | 53.5 | 10 | 8 | 13 | 20.0 | |||
MT-1 | 200 | 42 | 29.5 | 10 | 10 | 14 | 21.0 | |||
S – 3 M 200 | C-13 * | 200 | 42 | 29.5 | 10 | 8 | 13 | 20.7 | ||
JT-D 5 | 200 | 42 | 29.5 | 4 | 3 | 5 | 20.0 | |||
JT-1 | 200 | 54 | 37.5 | 6 | 5 | 6.5 | 20.1 | |||
JT-2 | 200 | 65 | 45.5 | 8 | 6 | 10 | 20.2 | |||
JT No. 6 | 200 | 76 | 53.5 | 10 | 8 | 13 | 20.3 | |||
MT-1 | 200 | 42 | 29.5 | 10 | 10 | 14 | 21.5 | |||
※ The minimum axis range of same speed tapping is 31 mm |
Use model icon (Click to go to the list)
Geometry
S – J 200 type | S-2M 200 type | S-3M 200 type |
The dimensions in the above figure are part of an attachable drilling machine and screw spindle. Detailed dimensions regarding actual model to be installed may be different, so please contact our service center. |
S-204 (for 2-axis pitch 29.5 mm to 204 mm)
Overview
A: Outer diameter of main shaft quill diameter B: Outer diameter of main shaft C: Length of main shaft end D: Outer diameter of flange of main shaft quill E: Thickness of flange of main shaft quill F: JT or MT number |
J Jacobs taper | M Morse taper | M Morse taper |
Performance specification
Model used Drilling machine | Screw used | Model | Types of chucks | Maximum axial distance (mm) | Minimum axis range of 4 axes (mm) | Minimum axis distance between two axes (mm) | Drilling ability per axis S45C (mm) | Screw standing capacity per axis S45C (M) | Maximum clamp diameter of chuck (mm) | Weight with 4 axes (kg) |
S- 3 M 204 | C-13 * | 200 | 42 | 29.5 | 10 | 10 | 13 | 27.0 | ||
JT-D 5 | 200 | 42 | 29.5 | 4 | 3 | 5 | 20.0 | |||
JT-1 | 200 | 54 | 37.5 | 6 | 5 | 6.5 | 20.1 | |||
JT-2 | 200 | 65 | 45.5 | 8 | 6 | 10 | 26.8 | |||
JT No. 6 | 200 | 76 | 53.5 | 10 | 8 | 13 | 27.8 | |||
MT-1 | 200 | 42 | 29.5 | 13 | 12 | 14 | 33.1 | |||
MT-2 | 200 | 54 | 37.5 | 19 | 14 | 23 | 34.1 | |||
S – 4M204 | C-13 * | 200 | 42 | 29.5 | 10 | 10 | 13 | 26.8 | ||
JT-D 5 | 200 | 42 | 29.5 | 4 | 3 | 5 | 25.9 | |||
JT-1 | 200 | 54 | 37.5 | 6 | 5 | 6.5 | 26.0 | |||
JT-2 | 200 | 65 | 45.5 | 8 | 6 | 10 | 26.1 | |||
JT No. 6 | 200 | 76 | 53.5 | 10 | 8 | 13 | 26.4 | |||
MT-1 | 200 | 42 | 29.5 | 13 | 12 | 14 | 27.3 | |||
MT-2 | 200 | 54 | 37.5 | 19 | 14 | 23 | 31.5 | |||
S – 5 M 204 | C-13 * | 200 | 42 | 29.5 | 10 | 10 | 13 | 29.9 | ||
JT-D 5 | 200 | 42 | 29.5 | 4 | 3 | 5 | 29.2 | |||
JT-1 | 200 | 54 | 37.5 | 6 | 5 | 6.5 | 29.3 | |||
JT-2 | 200 | 65 | 45.5 | 8 | 6 | 10 | 29.4 | |||
JT No. 6 | 200 | 76 | 53.5 | 10 | 8 | 13 | 29.5 | |||
MT-1 | 200 | 42 | 29.5 | 13 | 12 | 14 | 30.6 | |||
MT-2 | 200 | 54 | 37.5 | 19 | 14 | 23 | 34.8 | |||
※ The minimum axis range of same speed tapping is 31 mm |
Use model icon (Click to go to the list)
Geometry
Model S-3M204 | S-4M 204 type | S-5M204 type |
The dimensions in the above figure are part of an attachable drilling machine and screw spindle. Detailed dimensions regarding actual model to be installed may be different, so please contact our service center. |
Related Products
-
Nippon Seimitsu Explosion-proof Dust Collector
-
NDV 5 ports Multi-branch valves Combination valves, and other special-purpose Bio-Clean diaphragm valves
-
Suiden SAC-100-AL/SAC-100-P Pneumatic Vacuum Cleaner – Dry and Wet Type Vacuum Cleaners
-
OSC77FD215MM-312MM Theory Of Machines
-
Daiichi Keiki ZMC Series Meter cock
-
SAKUSAKU Set Screw for Indexable Drills