Japan, Murata
Murata Support pipe mounting pedestal and accessories
Product Made by Japan
Manufacturer : Murata
| Model | 35010 | 35011 | 35012 | 35013 | 35014 | 35015 | 35016 |
| 35010-S | 35011-S | 35012-S | 35013-S | 35014-S | 35015-S | 35016-S |
| Model | Material | Plate size | Support tube φ | Sagger outer diameter φ | Sagger tube Bt | Base plate Ct | Hole diameter Dφ | Rib Et | Set anchor (Part No.) | Weight kg |
|---|---|---|---|---|---|---|---|---|---|---|
| 35010 | Steel (hot-dip gulvanized) | 400×400 | 48.6 | 65 | 5 | 9 | 18 | 6 | M12(35120) | 14.00 |
| 35011 | 60.5 | 76.3 | 5 | 12 | 24 | 6 | M16(35121) | 24.00 | ||
| 35012 | 76.3 | 95 | 5 | 12 | 24 | 6 | M16(35121) | 25.00 | ||
| 35013 | 89.1 | 105 | 5 | 16 | 24 | 6 | M16(35121) | 31.00 | ||
| 35014 | 101.6 | 120 | 5 | 16 | 28 | 6 | M20(35122) | 32.00 | ||
| 35015 | 114.3 | 139.8 | 5 | 19 | 28 | 6 | M20(35122) | 41.00 | ||
| 35016 | 500×500 | 139.8 | 159 | 6 | 19 | 28 | 9 | M20(35122) | 56.00 | |
| 35010-S | Stainless Steel (SUS304) | 400×400 | 48.6 | 65 | 5 | 9 | 18 | 6 | M12(35120-S) | 14.12 |
| 35011-S | 60.5 | 76.3 | 5.2 | 12 | 24 | 6 | M16(35121-S) | 24.21 | ||
| 35012-S | 76.3 | 95 | 5 | 12 | 24 | 6 | M16(35121-S) | 25.22 | ||
| 35013-S | 89.1 | 105 | 5 | 16 | 24 | 6 | M16(35121-S) | 31.28 | ||
| 35014-S | 101.6 | 120 | 5 | 16 | 28 | 6 | M20(35122-S) | 32.28 | ||
| 35015-S | 114.3 | 139.8 | 6.6 | 19 | 28 | 9 | M20(35122-S) | 41.36 | ||
| 35016-S | 500×500 | 139.8 | 165.2 | 7.1 | 19 | 28 | 9 | M20(35122-S) | 56.50 |
Pedestal for single-slope roof
| Model | 36010-1 | 36011-1 | 36012-1 | 36013-1 |
| 36010-S1 | 36011-S1 | 36012-S1 | 36013-S1 |
| Model | Material | Support tube φ | Sagger outer diameter φ | Bt |
|---|---|---|---|---|
| 36010-1 | Steel (hot dip gulvanized) | 48.6 | 65 | 5 |
| 36011-1 | 60.5 | 76.3 | 5 | |
| 36012-1 | 76.3 | 95 | 5 | |
| 36013-1 | 89.1 | 105 | 5 | |
| 36010-S1 | Stainless Steel (SUS304) | 48.6 | 65 | 5 |
| 36011-S1 | 60.5 | 76.3 | 5.2 | |
| 36012-S1 | 76.3 | 95 | 5 | |
| 36013-S1 | 89.1 | 105 | 5 |
※ For the above products, please specify the roof slope.
Slope, installation distance, etc. may vary depending on the roof manufacturer,
Please also note the size of the corners, etc.
※Weight varies depending on the size of the corner.
※Reinforce the roof with support wire, etc., depending on installation conditions.
Pedestal for double-slope roof
| Model | 36210-1 | 36211-1 | 36212-1 | 36213-1 |
| 36210-S1 | 36211-S1 | 36212-S1 | 36213-S1 |
| Model | Material | Support tube φ | Sagger outer diameter φ | Bt |
|---|---|---|---|---|
| 36210-1 | Steel (hot dip gulvanized) | 48.6 | 65 | 5 |
| 36211-1 | 60.5 | 76.3 | 5 | |
| 36212-1 | 76.3 | 95 | 5 | |
| 36213-1 | 89.1 | 105 | 5 | |
| 36210-S1 | Stainless Steel (SUS304) | 48.6 | 65 | 5 |
| 36211-S1 | 60.5 | 76.3 | 5.2 | |
| 36212-S1 | 76.3 | 95 | 5 | |
| 36213-S1 | 89.1 | 105 | 5 |
※ For the above products, please specify the roof slope.
Slope, installation distance, etc. may vary depending on the roof manufacturer,
Please also note the size of the corners, etc.
※Weight varies depending on the size of the corner.
※Reinforce the roof with support wire, etc., depending on installation conditions.
Reference example of self-help pickup and payment
Reference example of a butt hook with stem tube support
Place bracket type anchor bolts
| Model | 35120 | 35121 | 35122 | 35123 |
| 35120-S | 35121-S | 35122-S | 35123-S |
| Model | Material | Anchor bolt A | B | C | Weight kg |
|---|---|---|---|---|---|
| 35120 | Steel (hot-dip gulvanized) | M12 | 300 | 338 | 4.50 |
| 35121 | M16 | 300 | 338 | 7.70 | |
| 35122 | M20 | 300 | 338 | 10.80 | |
| 35123 | 400 | 438 | 13.20 | ||
| 35120-S | Stainless Steel (SUS304) | M12 | 300 | 338 | 4.54 |
| 35121-S | M16 | 300 | 338 | 7.77 | |
| 35122-S | M20 | 300 | 338 | 10.90 | |
| 35123-S | 400 | 438 | 13.32 |
Allowable load when installing anchor bolts (free standing type)
Ta: Allowable short-term withdrawal load of anchor bolts (kN)
d: Nominal diameter of anchor bolts (cm)
l: Effective buried length of anchor bolts (cm)
fc: Adhesion capacity for Short-term performance of reinforced concrete 9
fc=100Fc and less than 0.203 (kN/cm)
(According to the standards for calculating reinforced concrete structures of the Institute of Architects of Japan)
Fc: Design basis for concrete ( kN/cm)
Ta=π*d*l*fc → l=Ta/π*d*fc
☆In general, the embedment depth should be 6 times or more than the bolt thickness.
☆ As shown in the figure on the left, 20 m/m of foundation surface is not included in the burial length.
3-way tension cord
| Model | 37210-1 | 37211-1 | 37212-1 | 37213 | 37214 | 37215 |
| 37210-S1 | 37211-S1 | 37212-S1 | 37213-S | 37214-S | 37215-S |
| Model | Material | Aφ | Bt | Bolt C | Weight kg |
|---|---|---|---|---|---|
| 37210-1 | Steel (hot-dip gulvanized) | 48.6 | 4.5 | M10 | 0.94 |
| 37211-1 | 60.5 | 4.5 | M10 | 1.02 | |
| 37212-1 | 76.3 | 4.5 | M10 | 1.12 | |
| 37213 | 89.1 | 6 | M12 | 1.20 | |
| 37214 | 101.6 | 6 | M12 | 1.23 | |
| 37215 | 114.3 | 6 | M12 | 1.25 | |
| 37210-S1 | Stainless Steel (SUS304) | 48.6 | 4 | M10 | 0.95 |
| 37211-S1 | 60.5 | 4 | M10 | 1.03 | |
| 37212-S1 | 76.3 | 4 | M10 | 1.13 | |
| 37213-S | 89.1 | 6 | M12 | 1.21 | |
| 37214-S | 101.6 | 6 | M12 | 1.24 | |
| 37215-S | 114.3 | 6 | M12 | 1.26 |
4-way tension cord
| Model | 37310-1 | 37311-1 | 37312-1 | 37313 | 37314 | 37315 |
| 37310-S1 | 37311-S1 | 37312-S1 | 37313-S | 37314-S | 37315-S |
| Model | Material | Aφ | Bt | Bolt C | Weight kg |
|---|---|---|---|---|---|
| 37310-1 | Steel (hot-dip gulvanized) | 48.6 | 4.5 | M10 | 1.19 |
| 37311-1 | 60.5 | 4.5 | M10 | 1.24 | |
| 37312-1 | 76.3 | 4.5 | M10 | 1.34 | |
| 37313 | 89.1 | 6 | M12 | 1.93 | |
| 37314 | 101.6 | 6 | M12 | 1.98 | |
| 37315 | 114.3 | 6 | M12 | 2.03 | |
| 37310-S1 | Stainless Steel (SUS304) | 48.6 | 4 | M10 | 1.20 |
| 37311-S1 | 60.5 | 4 | M10 | 1.25 | |
| 37312-S1 | 76.3 | 4 | M10 | 1.35 | |
| 37313-S | 89.1 | 6 | M12 | 1.95 | |
| 37314-S | 101.6 | 6 | M12 | 2.00 | |
| 37315-S | 114.3 | 6 | M12 | 2.05 |
Wire
| Model | 38010 | 38011 |
| 38010-S | 38011-S |
| Model | Material | Wire size | Weight kg(1m equivalent) |
|---|---|---|---|
| 38010 | Steel (hot-dip gulvanized) | 6φ | 0.15 |
| 38011 | 9φ | 0.33 | |
| 38010-S | Stainless Steel (SUS304) | 6φ | 0.15 |
| 38011-S | 9φ | 0.33 |
Power line
| Model | 38110 | 38111 |
| 38110-S | 38111-S |
| Model | Material | Wire size A | B | C | D | Weight kg |
|---|---|---|---|---|---|---|
| 38110 | Steel (hot-dip gulvanized) | 6φ | 8 | 36 | 16 | 0.02 |
| 38111 | 9φ | 11 | 51 | 25 | 0.06 | |
| 38110-S | Stainless Steel (SUS304) | 6φ | 8 | 36 | 16 | 0.02 |
| 38111-S | 9φ | 11 | 51 | 25 | 0.04 |
Clamp Wire
| Model | 38210 | 38211 |
| 38210-S | 38211-S |
| Model | Material | Wire size | A | B | C | D | E | Weight kg |
|---|---|---|---|---|---|---|---|---|
| 38210 | Steel (hot-dip gulvanized) | 6φ | 32 | 14 | 15 | 16 | 21 | 0.02 |
| 38211 | 9φ | 40 | 17 | 22 | 20 | 32 | 0.06 | |
| 38210-S | Stainless Steel (SUS304) | 6φ | 30 | 10 | 15 | 15 | 20 | 0.02 |
| 38211-S | 9φ | 45 | 17 | 24 | 22 | 28 | 0.04 |
Tension screw
| Model | 38310 | 38311 |
| 38310-S | 38311-S |
| Model | Material | Wire size | A | B | C | D | E | Weight kg |
|---|---|---|---|---|---|---|---|---|
| 38310 | Steel (hot-dip gulvanized) | 6φ | 115 | 45 | 70 | 150 | 3/8 | 0.33 |
| 38311 | 9φ | 178 | 60 | 118 | 200 | 1/2 | 0.63 | |
| 38310-S | Stainless Steel (SUS304) | 6φ | 115 | 45 | 70 | 150 | M10 | 0.30 |
| 38311-S1 | 9φ | 160 | 60 | 100 | 200 | M12 | 0.56 |
For anchor (eyebolt)
| Model | 38410-1 |
| 38410-S1 |
| Model | Material | Weight kg |
|---|---|---|
| 38410-1 | Steel (hot-dip gulvanized) | 0.07 |
| 38410-S1 | Stainless Steel (SUS304) |
Holding angle (with latch)
| Model | Material | Weight kg |
|---|---|---|
| 38414-1 | Steel (hot-dip gulvanized) | 2.74 |
| 38414-S1 | Stainless Steel (SUS304) | 2.78 |
Reference example of the above branch line
Reference example of installing a railing on the lower part of the support line
Reference example to pay the lower part of the original branch line of the folding roof panel
Folding panel roof When installing on a slate or other roof, reinforce the support tube with support wire.
