Japan, NAGAHORI INDUSTRY, Quick Couplings
NAC – AT TYPE (Steel Sleeve) Quick Couplings

Made in Japan
Manufacturer : NAGAHORI INDUSTRY CO., LTD.
Model : 21SH, 21SM, 21SF, 21SA, 22SH, 22SM, 22SF, 22SA, 22SB, 23SH,M,F, 23SA,B, 24SH,M,F,A,
Low pressure, Single valve One touch Type
- One hand operation allows fast and easy connection and disconnection.
- This series can be connected to AL TYPE20 plugs.
- The inner mechanism allows the larger flow than AL TYPE by 15%.
Caution
- Not interchangeable with AL TYPE 40.
- Fluid should flow from socket to plug.
- Scraps of the seal tape and dust causes fluid leakage. Be careful not to stick them to the couplings.
- Do not impact, hit, pull or bent. Don’t dismantle. It causes damage to the coupling.

Specification
Model | 21 | 22 | 23 | 24 |
|---|---|---|---|---|
Nominal size | 1/8″ | 1/4″ | 3/8″ | 1/2″ |
Nominal pipe size (mm) | 6 | 8 | 10 | 15 |
Body material | Steel (Chrome-plated) | |||
Connection | Female thread (F), Male thread(M), Hose nipple(H), Polyurethane coil tube connection(A,B) | |||
Packing material | Nitrile rubber (NBR) | |||
Normal pressure | 1.0MPa | |||
Max.pressure | 1.5MPa | |||
Applicable fluid | Air, etc. | |||
Flow’s smallest area

Related Products
-

Watanabe WCT-2CR Penetration Type Current Transformer – Accessory
-

Seiwa E04RC311908 RC, RM and RMX Types Non-split Cores
-

Chiyoda Seiki GS-140L/GS-140L-H Medium Flow Self-powered Pressure Regulator (Primary pressure: 3.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 150 m3/h・Air)
-

Mirai Kogyo DPRY-50G Drain Piping Expansion Joint (Different Diameter 45° Y)
-

SANYUTEC FSD-Type Mechanic Double Type Universal Joint
-

LOBTEX BJ3000 Ball Joint





