NACHI SE/SED-G01-40 Series Valve

Made in: Japan
Manufacturer: NACHI
Model: SE/SED-G01-40 Series

Features

We have added the SED series using the DIN connector wiring system to the low power type.

Realizes maximum working pressure, maximum flow, and allowed back pressure for the 5W class
Maximum pressure 16MPa
Maximum flow 40L/min
Permissible back pressure 16MPa
CE Approval
We have prepared a terminal box/DIN connector wiring product and a connector (M12-4 pin connector) wiring product, so selection using the formal auxiliary symbol is possible.
Surge-less Circuit is standard equipment
The connector wiring product can be directly connected to a wire-saving system such as Device Net, etc.

Electronic box wiring product: auxiliary symbol for relay drive (GR)

Lumped terminal box internal circuit
SE/SED-G01-40 Series

Advantages of the terminal box wiring product

Due to the built-in varistor the recovery time is short and optimal for circuits for which a high-speed response is necessary. Due to the built-in varistor the recovery time is short and optimal for circuits for which a high-speed response is necessary.
Reduces the occurrence of sparks from the relay contact drive, etc. and lengthens the life of the points of contact

SE/SED-G01-40 Series Wiring using the terminal block inside the terminal box

Connector wiring product: auxiliary symbol for the sequencer drive (GRV)

Lumped terminal box internal circuit

Advantages of the connector wiring product

We have built in a diode for preventing reverse voltage so the addition of a sequencer output (transistor) protection elements is not necessary
One-touch wiring is possible
Direct connection to a wire-saving system such as Device Net, etc. is possible

Wiring with an M12-4 pin connector

Overseas safety standards

Item	SE/SED-G01-40 Series
Maximum pressure ((P,A,B port)	16MPa
Max.flow ^(note1)	40L/min
Permissible back pressure (T port)	16MPa
Holding power (DC24V)	4.8W
Dust and spray protection type	JIS C 0920 IP64(SE-G01), IP65(SED-G01)
Overseas safety standards	CE marking

(note1) The maximum flow differs depending on the operation symbol, circuit, and working conditions.