Japan, Nippon Chemical Screw
Nippon Chemical Screw PEEK GF30/MPH(M-L) PEEK/GF30 micro (+) pan head machine screw
Made in Japan
Manufacturer : Nippon Chemical Screw
Model : PEEK GF30/MPH(M-L)
Polyetheretherketone GF30 micro (+) pan head machine screw.
| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
| M | M1.2 | M1.4 | M1.6 | |
| pitch | 0.25 | 0.3 | 0.35 | |
| D×H | 1.8×0.5 | 2×0.5 | 2.3×0.5 | |
| L (mm) | 1.5 | 100 | ─ | ─ |
| 1.8 | 100 | ─ | ─ | |
| 2 | 100 | 100 | 100 | |
| 2.5 | 100 | 100 | 100 | |
| 3 | 100 | 100 | 100 | |
| 3.5 | 100 | 100 | 100 | |
| 4 | 100 | 100 | 100 | |
| 6 | ─ | 100 | 100 | |
Sales unit Quantity
Torsional rupture torque
| Unit/Unit | M1.2 | M1.4 | M1.6 |
| N•m | 0.025 | 0.026 | 0.033 |
Tensile rupture force
| Unit/Unit | M1.2 | M1.4 | M1.6 |
| N | 81 | 69 | 83 |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
