Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PEEK/LH(M-L)
Polyetheretherketone low head bolt with hexalobular hole.
| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
| M | M3 | M4 | M5 | M6 |
| pitch | 0.5 | 0.7 | 0.8 | 1 |
| D×H | 5.5×2.4 | 7×3.1 | 8.5×3.65 | 10×4.4 |
| hole number | 10 | 20 | 25 | 30 |
| L(mm) | 6 | 100 | 100 | 100 | ─ |
| 8 | 100 | 100 | 100 | ─ |
| 10 | 100 | 100 | 100 | 100 |
| 12 | 100 | 100 | 100 | 100 |
| 16 | 100 | 100 | 100 | 100 |
| 20 | 100 | 100 | 100 | 100 |
| 25 | ─ | 100 | 100 | 100 |
| 30 | ─ | ─ | 100 | 100 |
| 40 | ─ | ─ | ─ | 100 |
Sales unit Quantity
Torsional rupture torque
| Unit/Unit | M3 | M4 | M5 | M6 |
| N m | 0.21 | 0.5 | 0.95 | 1.65 |
Tensile rupture force
| Unit/Unit | M3 | M4 | M5 | M6 |
| N | 406 | 760 | 1277 | 1747 |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
